Which tire is taller, 155/80 R13 or 175/65 R14?

175/65 R14 is taller by 4.9 mm (0.85%) compared with 155/80 R13.

What is the diameter difference between 155/80 R13 and 175/65 R14?

155/80 R13 measures 578 mm overall diameter, 175/65 R14 measures 583 mm — a difference of 4.9 mm (0.85%).

How much speedometer error does this change create?

Switching from 155/80 R13 to 175/65 R14 changes the speedometer reading by +0.85%. At an indicated 100 km/h, your true speed becomes about 100.8 km/h.

Is 175/65 R14 a safe replacement for 155/80 R13?

Within ±3% diameter — generally considered a safe replacement from a speedometer-error standpoint, provided wheel offset, rim width and clearance also match your vehicle.

What else should I check before changing tire size?

Beyond diameter and speedometer error, verify wheel offset (ET), rim width, hub bore, load index, brake and suspension clearance, and your vehicle's manufacturer specification. Local regulations may also limit how far you can deviate from OEM.

Fitment comparison

155/80 R13versus175/65 R14

Δ Ø +4.9 mmSpeedo +0.85%OEM-safe

175/65 R14 stands taller than 155/80 R13 — bigger rolling diameter, slightly more clearance, calmer cruise revs.

175/65 R14 is a plus-1 alternative to 155/80 R13 — the bigger wheel shows through a thinner sidewall. This tire combination barely shifts the rolling circumference. The speedometer offset is mild and well inside what most cars can tolerate without recalibration. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.

TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.

Quick fitment verdict

155/80 R13 → 175/65 R14 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Check at lock

Wider or taller setup — verify clearance at full steering lock and over bumps.

Speedometer Impact

+0.85%

At a true 100 km/h the dash reads 100.8 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

155/80 R13

Diameter: 578.2 mm
Sidewall: 124.0 mm
Wheel: 13″
Width: 155 mm

Δ delta

Ø +4.9 mm

SW -10.3 mm

RH +2.4 mm

NewNew

175/65 R14

Diameter: 583.1 mm
Sidewall: 113.8 mm
Wheel: 14″
Width: 175 mm

Real-world effects

How this swap actually feels

Steering response
75/100 · Sharper turn-in
Ride comfort
45/100 · Firmer ride
Fuel economy
45/100 · Slightly higher drag
Highway cruising
63/100 · Lower cruise revs
Pothole resistance
38/100 · Less wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lifted stance

+2.4 mm

Chassis sits higher — slightly more clearance, wheel-gap visually grows.

New tire lifts the chassis by ~2.4 mm — more clearance, slightly more wheel-gap.

Suspension travel · arch clearance

Wheel gap

Wheel gap visually increases

+2.4 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

155/80 R13

175/65 R14

Wheel-gap Δ+2.4 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 100.8 km/h

+0.85%

Taller rubber: at a true 100 km/h your dashboard reads optimistically high.

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 155/80 R13 → 175/65 R14 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

-10.3 mm sidewall

Sharper steering response

Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.

Ride firmness

80% → 65%

Slightly firmer over rough pavement

Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.

Fender relationship

+20 mm width

Wheel sits closer to the fender

Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.

Speedometer behavior

+0.85%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø +4.9 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 175/65 R14 OEM-safe?

Yes. Overall diameter changes by +0.85% versus 155/80 R13. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 175/65 R14 rub?

Borderline. Width changes by +20 mm and diameter by +4.9 mm. Borderline — check fender lip and inner strut clearance under load.

Direct answer

Does the speedometer change?

Yes — by +0.85%. Swapping 155/80 R13 for 175/65 R14 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.8 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — firmer ride. Sidewall changes by -10.3 mm (80% → 65%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.

Current Tire

155/80R13

Width

Ratio

Rim

New Tire

175/65R14

Width

Ratio

Rim

Fitment · Scaled comparison

● Excellent fit

155/80 R13

Diameter

+4.9 mm

+0.85%

Sidewall

-10.3 mm

Speedometer

100.8 km/h

at true 100

Clearance

Excellent fit

175/65 R14

Ground line · Scaled comparison

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

+4.9 mm

0.85%

Speedometer at 100

100.8 km/h

+0.85% error

Ground clearance

+2.4 mm

ride height delta

Sidewall change

-10.3 mm

revs/km: 545.9

Open visual comparisonCompare visually

Permalink for this comparison:

/compare/155-80-r13-vs-175-65-r14

Detailed comparison

Metric	155/80 R13	175/65 R14	Difference
Overall diameter	578.2 mm	583.1 mm	+4.9 mm (+0.85%)
Sidewall height	124.0 mm	113.8 mm	-10.3 mm
Circumference	1.816 m	1.832 m	+15.4 mm
Revs / km	550.5	545.9	-4.6
Ground clearance	reference	+2.4 mm	+2.4 mm
Speedometer @ 100 km/h	100.0 km/h	100.8 km/h	+0.85 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

155/80 R13

Profile: 80%
Circumference: 1.816 m

New

175/65 R14

Profile: 65%
Circumference: 1.832 m

Side-by-side fitment

Geometry

Current

155/80 R13

Section width: 155 mm
Aspect ratio: 80%
Sidewall: 124.0 mm
Wheel diameter: 13″(330 mm)
Overall diameter: 578.2 mm(22.76″)
Circumference: 1.816 m
Revs / km: 550.5

New

175/65 R14

Section width: 175 mm
Aspect ratio: 65%
Sidewall: 113.8 mm
Wheel diameter: 14″(356 mm)
Overall diameter: 583.1 mm(22.96″)
Circumference: 1.832 m
Revs / km: 545.9

Real-world consequences

Pros / cons

Wider tire (+20 mm)

Section width

More dry grip and cornering bite
Sharper steering response on initial turn-in
Bigger contact patch under braking
More road noise on coarse asphalt
Worse aquaplaning resistance in standing water
Higher rolling resistance, small MPG hit
Possible fender or strut contact at full lock

Lower profile (-15% aspect)

Sidewall

Sharper turn-in and less sidewall roll
More planted on smooth tarmac
Bigger brake / caliper visual real estate
Harsher ride over expansion joints and potholes
Higher wheel-damage risk on impacts
Less curb protection for the rim lip
More sensitive to correct tire pressure

+1″ rim upsize

Wheel diameter

OEM+ look, fills the arch better
Sharper response with matching low-profile rubber
Bigger brake clearance for upgrades
Heavier wheel, more unsprung mass
Harsher ride, more wheel-damage risk
Tire and wheel cost both go up

How it changes driving feel

Seat-of-the-pants

Steering response

Sharper turn-in

Ride comfort

Harsher impacts

Road noise

Louder on coarse asphalt

Wet / aquaplaning

Reduced standing-water margin

Fuel economy

Small MPG penalty likely

Curb / pothole protection

Higher wheel-damage risk

Fitment risk check

Verify before install

Fender rubbing

Width jump >20 mm — verify fender lip and inner liner clearance at full lock.

Suspension clearance

Wider tire may contact strut or control arm on full compression.

Cluster preview

Within tolerance

Speedometer impact

At a true 100 km/h, your dashboard will read 100.8 km/h after switching to 175/65 R14 — a +0.85% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by +2.4 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

155/80 R13

Back to

175/65 R14