OEM Safe
Out of spec
Beyond OEM tolerance — speedometer and ABS need professional review.
Fitment comparison
165/55 R16versus245/40 R17
Δ Ø +39.9 mmSpeedo +6.79%Aggressive
245/40 R17 stands taller than 165/55 R16 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
245/40 R17 is a plus-1 alternative to 165/55 R16 — the bigger wheel shows through a thinner sidewall. This tire combination swings rolling diameter far enough to feel on the road. The dashboard speed will be significantly off — plan on recalibration before daily use. Less sidewall flex usually translates to crisper turn-in and a slightly stiffer ride over rough pavement. A diameter change beyond 5% is aggressive enough to influence ABS, traction control and gearing; treat it as a serious modification.
TakeRecommended only after a professional fitment check and speedometer recalibration.
Quick fitment verdict
165/55 R16 → 245/40 R17 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+6.79%
Dash reads 106.8 km/h at a true 100 km/h — recalibrate.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
165/55 R16
- Diameter
- 587.9 mm
- Sidewall
- 90.8 mm
- Wheel
- 16″
- Width
- 165 mm
Δ delta
Ø +39.9 mm
SW +7.3 mm
RH +19.9 mm
NewNew
245/40 R17
- Diameter
- 627.8 mm
- Sidewall
- 98.0 mm
- Wheel
- 17″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response46/100 · Softer turn-in
- Ride comfort74/100 · More cushion
- Fuel economy4/100 · Slightly higher drag
- Highway cruising84/100 · Lower cruise revs
- Pothole resistance71/100 · More wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~19.9 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
165/55 R16
245/40 R17
Wheel-gap Δ+19.9 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 106.8 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 165/55 R16 → 245/40 R17 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
+7.3 mm sidewallSofter, more relaxed turn-in
Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.
Ride firmness
55% → 40%Softer over potholes and joints
Bumps and expansion joints are absorbed better — a comfort win for daily driving.
Fender relationship
+80 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+6.79%Out of tolerance — recalibrate
Beyond ±5% — speedometer, gearing and ABS calibration all need a professional review.
Daily drivability
Ø +39.9 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 245/40 R17 OEM-safe?
No. Overall diameter changes by +6.79% versus 165/55 R16. Not OEM-safe. Overall diameter strays beyond ±5% — recalibration and clearance review are required.
Direct answer
Will 245/40 R17 rub?
Possibly. Width changes by +80 mm and diameter by +39.9 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +6.79%. Swapping 165/55 R16 for 245/40 R17 changes overall diameter, so at an indicated 100 km/h your true speed becomes 106.8 km/h. That's outside safe tolerance — recalibrate.
Direct answer
Does lower sidewall affect comfort?
Yes — softer ride. Sidewall changes by +7.3 mm (55% → 40%). Ride softens and absorbs bumps better, with slightly less precise turn-in.
Current Tire
165/55R16
New Tire
245/40R17
Fitment · Scaled comparison
● Not recommended
165/55 R16
Diameter
+39.9 mm
+6.79%
Sidewall
+7.3 mm
Speedometer
106.8 km/h
at true 100
Clearance
Not recommended
245/40 R17
Ground line · Scaled comparison
Not Recommended
Over 5% — speedometer & ABS may misread
Diameter change
+39.9 mm
6.79%
Speedometer at 100
106.8 km/h
+6.79% error
Ground clearance
+19.9 mm
ride height delta
Sidewall change
+7.3 mm
revs/km: 507.0
Permalink for this comparison:
/compare/165-55-r16-vs-245-40-r17Detailed comparison
| Metric | 165/55 R16 | 245/40 R17 | Difference |
|---|---|---|---|
| Overall diameter | 587.9 mm | 627.8 mm | +39.9 mm (+6.79%) |
| Sidewall height | 90.8 mm | 98.0 mm | +7.3 mm |
| Circumference | 1.847 m | 1.972 m | +125.3 mm |
| Revs / km | 541.4 | 507.0 | -34.4 |
| Ground clearance | reference | +19.9 mm | +19.9 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 106.8 km/h | +6.79 km/h |
Verdict: danger
Over 5% diameter difference — likely to affect speedometer accuracy, ABS calibration and gearing. Not recommended without professional review.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
165/55 R16- Profile
- 55%
- Circumference
- 1.847 m
New
245/40 R17- Profile
- 40%
- Circumference
- 1.972 m
Side-by-side fitment
GeometryCurrent
165/55 R16- Section width
- 165 mm
- Aspect ratio
- 55%
- Sidewall
- 90.8 mm
- Wheel diameter
- 16″(406 mm)
- Overall diameter
- 587.9 mm(23.15″)
- Circumference
- 1.847 m
- Revs / km
- 541.4
New
245/40 R17- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 17″(432 mm)
- Overall diameter
- 627.8 mm(24.72″)
- Circumference
- 1.972 m
- Revs / km
- 507.0
Real-world consequences
Pros / consWider tire (+80 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-15% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
Taller overall (+39.9 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~6.8%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Speedometer drift
~6.8% diameter delta — speedo and ABS calibration likely affected.
ABS / ESP calibration
Outside factory tolerance — recalibration may be required for safety systems.
Cluster preview
Excessive driftSpeedometer impact
At a true 100 km/h, your dashboard will read 106.8 km/h after switching to 245/40 R17 — a +6.79% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +19.9 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
165/55 R16
Back to
245/40 R17
Drivers also compare
Closely-related fitments and plus-size swaps for 165/55 R16 and 245/40 R17.
215/45 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 0.40%
225/45 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.02%
245/40 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.27%
205/50 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.41%
205/45 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.87%
235/45 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 2.41%
215/50 R17 vs 245/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 2.94%
245/40 R17 vs 245/45 R17
Same wheel, taller sidewall for extra cushioning.
Δ 3.90%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.