OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
175/70 R13versus205/45 R16
Δ Ø +15.7 mmSpeedo +2.73%OEM-safe
205/45 R16 stands taller than 175/70 R13 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Going from 175/70 R13 to 205/45 R16 steps up to a 16-inch rim while trimming sidewall to stay near OEM rolling diameter. This swap shifts overall diameter slightly from OEM. The shorter sidewall gives the tire a firmer, more responsive feel and sharpens steering input.
Expect a slight but noticeable shift in indicated speed compared to the original tires. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeA solid pick for drivers chasing a more aggressive stance without abandoning OEM rolling diameter.
Quick fitment verdict
175/70 R13 → 205/45 R16 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+2.73%
At a true 100 km/h the dash reads 102.7 km/h — negligible.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
175/70 R13
- Diameter
- 575.2 mm
- Sidewall
- 122.5 mm
- Wheel
- 13″
- Width
- 175 mm
Δ delta
Ø +15.7 mm
SW -30.3 mm
RH +7.8 mm
NewNew
205/45 R16
- Diameter
- 590.9 mm
- Sidewall
- 92.3 mm
- Wheel
- 16″
- Width
- 205 mm
Real-world effects
How this swap actually feels
- Steering response100/100 · Sharper turn-in
- Ride comfort16/100 · Firmer ride
- Fuel economy29/100 · Slightly higher drag
- Highway cruising69/100 · Lower cruise revs
- Pothole resistance6/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~7.8 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
175/70 R13
205/45 R16
Wheel-gap Δ+7.8 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 102.7 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 175/70 R13 → 205/45 R16 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-30.3 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
70% → 45%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+30 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+2.73%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø +15.7 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 205/45 R16 OEM-safe?
Yes. Overall diameter changes by +2.73% versus 175/70 R13. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 205/45 R16 rub?
Possibly. Width changes by +30 mm and diameter by +15.7 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +2.73%. Swapping 175/70 R13 for 205/45 R16 changes overall diameter, so at an indicated 100 km/h your true speed becomes 102.7 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -30.3 mm (70% → 45%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
175/70R13
New Tire
205/45R16
Fitment · Scaled comparison
● Excellent fit
175/70 R13
Diameter
+15.7 mm
+2.73%
Sidewall
-30.3 mm
Speedometer
102.7 km/h
at true 100
Clearance
Excellent fit
205/45 R16
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
+15.7 mm
2.73%
Speedometer at 100
102.7 km/h
+2.73% error
Ground clearance
+7.8 mm
ride height delta
Sidewall change
-30.3 mm
revs/km: 538.7
Permalink for this comparison:
/compare/175-70-r13-vs-205-45-r16Detailed comparison
| Metric | 175/70 R13 | 205/45 R16 | Difference |
|---|---|---|---|
| Overall diameter | 575.2 mm | 590.9 mm | +15.7 mm (+2.73%) |
| Sidewall height | 122.5 mm | 92.3 mm | -30.3 mm |
| Circumference | 1.807 m | 1.856 m | +49.3 mm |
| Revs / km | 553.4 | 538.7 | -14.7 |
| Ground clearance | reference | +7.8 mm | +7.8 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 102.7 km/h | +2.73 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
175/70 R13- Profile
- 70%
- Circumference
- 1.807 m
New
205/45 R16- Profile
- 45%
- Circumference
- 1.856 m
Side-by-side fitment
GeometryCurrent
175/70 R13- Section width
- 175 mm
- Aspect ratio
- 70%
- Sidewall
- 122.5 mm
- Wheel diameter
- 13″(330 mm)
- Overall diameter
- 575.2 mm(22.65″)
- Circumference
- 1.807 m
- Revs / km
- 553.4
New
205/45 R16- Section width
- 205 mm
- Aspect ratio
- 45%
- Sidewall
- 92.3 mm
- Wheel diameter
- 16″(406 mm)
- Overall diameter
- 590.9 mm(23.26″)
- Circumference
- 1.856 m
- Revs / km
- 538.7
Real-world consequences
Pros / consWider tire (+30 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-25% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
Taller overall (+15.7 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~2.7%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
+3″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 102.7 km/h after switching to 205/45 R16 — a +2.73% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +7.8 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
175/70 R13
Back to
205/45 R16
Drivers also compare
Closely-related fitments and plus-size swaps for 175/70 R13 and 205/45 R16.
155/80 R13 vs 175/70 R13
Wider variation on the same rim — more grip, less clearance.
Δ 0.52%
195/50 R16 vs 205/45 R16
Wider variation on the same rim — more grip, less clearance.
Δ 1.75%
165/70 R13 vs 175/70 R13
Wider variation on the same rim — more grip, less clearance.
Δ 2.49%
205/45 R16 vs 205/50 R16
Same wheel, taller sidewall for extra cushioning.
Δ 3.47%
195/55 R16 vs 205/45 R16
Wider variation on the same rim — more grip, less clearance.
Δ 4.83%
155/70 R13 vs 175/70 R13
Wider variation on the same rim — more grip, less clearance.
Δ 4.87%
205/45 R16 vs 215/50 R16
Wider variation on the same rim — more grip, less clearance.
Δ 4.91%
175/70 R13 vs 195/50 R15
Plus-two upgrade — bigger wheel, much shorter sidewall.
Δ 0.14%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.