OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
225/55 R16versus245/40 R18
Δ Ø -0.7 mmSpeedo -0.11%OEM-safe
225/55 R16 and 245/40 R18 are dimensionally near-identical — a swap with no meaningful speedometer impact.
Plus-sizing from 225/55 R16 to 245/40 R18 keeps overall diameter close to factory while opening room for a larger 18-inch wheel. This tire combination lands within OEM rolling-diameter tolerance. Less sidewall flex usually translates to crisper turn-in and a slightly stiffer ride over rough pavement.
Speedometer error is effectively zero, so ABS and traction control read the road as they did from the factory. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
225/55 R16 → 245/40 R18 at a glance
Fender Clearance
Check at lock
Wider or taller setup — verify clearance at full steering lock and over bumps.
Speedometer Impact
-0.11%
At a true 100 km/h the dash reads 99.9 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
225/55 R16
- Diameter
- 653.9 mm
- Sidewall
- 123.8 mm
- Wheel
- 16″
- Width
- 225 mm
Δ delta
Ø -0.7 mm
SW -25.8 mm
RH -0.3 mm
NewNew
245/40 R18
- Diameter
- 653.2 mm
- Sidewall
- 98.0 mm
- Wheel
- 18″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response97/100 · Sharper turn-in
- Ride comfort23/100 · Firmer ride
- Fuel economy46/100 · Slightly higher drag
- Highway cruising60/100 · Higher cruise revs
- Pothole resistance13/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Identical stance
Virtually identical ride height — no visual stance change.
Virtually identical ride height — no visual stance change.
Suspension travel · arch clearance
Wheel gap
Wheel gap stays virtually unchanged
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
225/55 R16
245/40 R18
Wheel-gap Δ-0.3 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 99.9 km/h
Shorter rubber: dashboard reads conservatively low — you're slower than it claims.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 225/55 R16 → 245/40 R18 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-25.8 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
55% → 40%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+20 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
-0.11%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø -0.7 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 245/40 R18 OEM-safe?
Yes. Overall diameter changes by -0.11% versus 225/55 R16. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 245/40 R18 rub?
Borderline. Width changes by +20 mm and diameter by -0.7 mm. Borderline — check fender lip and inner strut clearance under load.
Direct answer
Does the speedometer change?
Yes — by -0.11%. Swapping 225/55 R16 for 245/40 R18 changes overall diameter, so at an indicated 100 km/h your true speed becomes 99.9 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -25.8 mm (55% → 40%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
225/55R16
New Tire
245/40R18
Fitment · Scaled comparison
● Excellent fit
225/55 R16
Diameter
-0.7 mm
-0.11%
Sidewall
-25.8 mm
Speedometer
99.9 km/h
at true 100
Clearance
Excellent fit
245/40 R18
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
-0.7 mm
-0.11%
Speedometer at 100
99.9 km/h
-0.11% error
Ground clearance
-0.3 mm
ride height delta
Sidewall change
-25.8 mm
revs/km: 487.3
Permalink for this comparison:
/compare/225-55-r16-vs-245-40-r18Detailed comparison
| Metric | 225/55 R16 | 245/40 R18 | Difference |
|---|---|---|---|
| Overall diameter | 653.9 mm | 653.2 mm | -0.7 mm (-0.11%) |
| Sidewall height | 123.8 mm | 98.0 mm | -25.8 mm |
| Circumference | 2.054 m | 2.052 m | -2.2 mm |
| Revs / km | 486.8 | 487.3 | +0.5 |
| Ground clearance | reference | -0.3 mm | -0.3 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 99.9 km/h | -0.11 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
225/55 R16- Profile
- 55%
- Circumference
- 2.054 m
New
245/40 R18- Profile
- 40%
- Circumference
- 2.052 m
Side-by-side fitment
GeometryCurrent
225/55 R16- Section width
- 225 mm
- Aspect ratio
- 55%
- Sidewall
- 123.8 mm
- Wheel diameter
- 16″(406 mm)
- Overall diameter
- 653.9 mm(25.74″)
- Circumference
- 2.054 m
- Revs / km
- 486.8
New
245/40 R18- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 653.2 mm(25.72″)
- Circumference
- 2.052 m
- Revs / km
- 487.3
Real-world consequences
Pros / consWider tire (+20 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-15% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+2″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 99.9 km/h after switching to 245/40 R18 — a -0.11% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by -0.3 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
225/55 R16
Back to
245/40 R18
Drivers also compare
Closely-related fitments and plus-size swaps for 225/55 R16 and 245/40 R18.
205/60 R16 vs 225/55 R16
Wider variation on the same rim — more grip, less clearance.
Δ 0.23%
215/45 R18 vs 245/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.38%
245/40 R18 vs 275/35 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.54%
225/45 R18 vs 245/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.99%
245/40 R18 vs 255/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.22%
235/40 R18 vs 245/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.24%
215/60 R16 vs 225/55 R16
Wider variation on the same rim — more grip, less clearance.
Δ 1.58%
215/55 R16 vs 225/55 R16
Wider variation on the same rim — more grip, less clearance.
Δ 1.71%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.