OEM Safe
Borderline
Noticeable drift from OEM — drivable, but recalibration is wise.
Fitment comparison
245/40 R19versus245/40 R20
Δ Ø +25.4 mmSpeedo +3.74%Borderline
245/40 R20 stands taller than 245/40 R19 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Switching from 245/40 R19 to 245/40 R20 is a plus-1 upgrade that wraps a shorter sidewall around a larger 20-inch wheel. This setup swings rolling diameter far enough to feel on the road. The speedometer error is noticeable and may warrant a recalibration if you rely on indicated speed. The larger wheel shows more of the brake hardware and tightens up the wheel-gap look. The 3–5% diameter gap puts this in caution territory: doable on many cars, but verify clearance and consider recalibration.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/40 R19 → 245/40 R20 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+3.74%
Dash reads 103.7 km/h at a true 100 km/h — visible drift.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
245/40 R19
- Diameter
- 678.6 mm
- Sidewall
- 98.0 mm
- Wheel
- 19″
- Width
- 245 mm
Δ delta
Ø +25.4 mm
SW 0.0 mm
RH +12.7 mm
NewNew
245/40 R20
- Diameter
- 704.0 mm
- Sidewall
- 98.0 mm
- Wheel
- 20″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response60/100 · Softer turn-in
- Ride comfort60/100 · Firmer ride
- Fuel economy62/100 · Slightly lower drag
- Highway cruising75/100 · Lower cruise revs
- Pothole resistance55/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~12.7 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/40 R19
245/40 R20
Wheel-gap Δ+12.7 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 103.7 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/40 R19 → 245/40 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
+0.0 mm sidewallSteering response stays familiar
Sidewall delta is small; the wheel will feel like the OEM setup at the rim.
Ride firmness
40% → 40%Ride quality essentially unchanged
Comfort delta is below the perceivable threshold for most drivers.
Fender relationship
+0 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
+3.74%Noticeable speedo drift
Drift is visible at highway speeds; ABS still works but loses a sliver of precision.
Daily drivability
Ø +25.4 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 245/40 R20 OEM-safe?
Borderline. Overall diameter changes by +3.74% versus 245/40 R19. Borderline. Drivable, but speedometer drift becomes noticeable and ABS calibration is affected.
Direct answer
Will 245/40 R20 rub?
Possibly. Width changes by +0 mm and diameter by +25.4 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +3.74%. Swapping 245/40 R19 for 245/40 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 103.7 km/h. That's noticeable drift but usually safe.
Direct answer
Does lower sidewall affect comfort?
Barely. Sidewall changes by +0.0 mm (40% → 40%). Comfort is essentially unchanged.
Current Tire
245/40R19
New Tire
245/40R20
Fitment · Scaled comparison
● Borderline
245/40 R19
Diameter
+25.4 mm
+3.74%
Sidewall
+0.0 mm
Speedometer
103.7 km/h
at true 100
Clearance
Borderline
245/40 R20
Ground line · Scaled comparison
Slight Difference
Within ±5% — usable, recalibration recommended
Diameter change
+25.4 mm
3.74%
Speedometer at 100
103.7 km/h
+3.74% error
Ground clearance
+12.7 mm
ride height delta
Sidewall change
0.0 mm
revs/km: 452.1
Permalink for this comparison:
/compare/245-40-r19-vs-245-40-r20Detailed comparison
| Metric | 245/40 R19 | 245/40 R20 | Difference |
|---|---|---|---|
| Overall diameter | 678.6 mm | 704.0 mm | +25.4 mm (+3.74%) |
| Sidewall height | 98.0 mm | 98.0 mm | 0.0 mm |
| Circumference | 2.132 m | 2.212 m | +79.8 mm |
| Revs / km | 469.1 | 452.1 | -16.9 |
| Ground clearance | reference | +12.7 mm | +12.7 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 103.7 km/h | +3.74 km/h |
Verdict: warning
Between 3% and 5% — noticeable speedometer drift; recalibration may be advisable.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/40 R19- Profile
- 40%
- Circumference
- 2.132 m
New
245/40 R20- Profile
- 40%
- Circumference
- 2.212 m
Side-by-side fitment
GeometryCurrent
245/40 R19- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 678.6 mm(26.72″)
- Circumference
- 2.132 m
- Revs / km
- 469.1
New
245/40 R20- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 704.0 mm(27.72″)
- Circumference
- 2.212 m
- Revs / km
- 452.1
Real-world consequences
Pros / consTaller overall (+25.4 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~3.7%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Similar feel
Ride comfort
Comparable
Road noise
Similar cabin noise
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Small MPG penalty likely
Curb / pothole protection
About the same
Fitment risk check
Verify before installSpeedometer drift
~3.7% — borderline; recalibration recommended.
Cluster preview
BorderlineSpeedometer impact
At a true 100 km/h, your dashboard will read 103.7 km/h after switching to 245/40 R20 — a +3.74% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +12.7 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/40 R19
Back to
245/40 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/40 R19 and 245/40 R20.
245/40 R20 vs 275/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.50%
245/40 R20 vs 285/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.50%
245/40 R19 vs 275/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.52%
245/40 R19 vs 285/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.52%
225/45 R19 vs 245/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.95%
245/40 R19 vs 255/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.18%
235/40 R19 vs 245/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.19%
245/40 R20 vs 265/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.49%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.