OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
245/40 R19versus285/30 R20
Δ Ø +0.4 mmSpeedo +0.06%OEM-safe
285/30 R20 stands taller than 245/40 R19 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Switching from 245/40 R19 to 285/30 R20 is a plus-1 upgrade that wraps a shorter sidewall around a larger 20-inch wheel. This wheel and tire pairing lands within OEM rolling-diameter tolerance. The dashboard reading stays essentially unchanged from the OEM calibration. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides. Overall the swap sits inside the safe ±3% diameter window, so ABS, traction control and gearing behave normally.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/40 R19 → 285/30 R20 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+0.06%
At a true 100 km/h the dash reads 100.1 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
245/40 R19
- Diameter
- 678.6 mm
- Sidewall
- 98.0 mm
- Wheel
- 19″
- Width
- 245 mm
Δ delta
Ø +0.4 mm
SW -12.5 mm
RH +0.2 mm
NewNew
285/30 R20
- Diameter
- 679.0 mm
- Sidewall
- 85.5 mm
- Wheel
- 20″
- Width
- 285 mm
Real-world effects
How this swap actually feels
- Steering response83/100 · Sharper turn-in
- Ride comfort37/100 · Firmer ride
- Fuel economy22/100 · Slightly higher drag
- Highway cruising60/100 · Lower cruise revs
- Pothole resistance29/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~0.2 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap stays virtually unchanged
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/40 R19
285/30 R20
Wheel-gap Δ+0.2 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 100.1 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/40 R19 → 285/30 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-12.5 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
40% → 30%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+40 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+0.06%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø +0.4 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 285/30 R20 OEM-safe?
Yes. Overall diameter changes by +0.06% versus 245/40 R19. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 285/30 R20 rub?
Possibly. Width changes by +40 mm and diameter by +0.4 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +0.06%. Swapping 245/40 R19 for 285/30 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.1 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -12.5 mm (40% → 30%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
245/40R19
New Tire
285/30R20
Fitment · Scaled comparison
● Excellent fit
245/40 R19
Diameter
+0.4 mm
+0.06%
Sidewall
-12.5 mm
Speedometer
100.1 km/h
at true 100
Clearance
Excellent fit
285/30 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
+0.4 mm
0.06%
Speedometer at 100
100.1 km/h
+0.06% error
Ground clearance
+0.2 mm
ride height delta
Sidewall change
-12.5 mm
revs/km: 468.8
Permalink for this comparison:
/compare/245-40-r19-vs-285-30-r20Detailed comparison
| Metric | 245/40 R19 | 285/30 R20 | Difference |
|---|---|---|---|
| Overall diameter | 678.6 mm | 679.0 mm | +0.4 mm (+0.06%) |
| Sidewall height | 98.0 mm | 85.5 mm | -12.5 mm |
| Circumference | 2.132 m | 2.133 m | +1.3 mm |
| Revs / km | 469.1 | 468.8 | -0.3 |
| Ground clearance | reference | +0.2 mm | +0.2 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 100.1 km/h | +0.06 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/40 R19- Profile
- 40%
- Circumference
- 2.132 m
New
285/30 R20- Profile
- 30%
- Circumference
- 2.133 m
Side-by-side fitment
GeometryCurrent
245/40 R19- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 678.6 mm(26.72″)
- Circumference
- 2.132 m
- Revs / km
- 469.1
New
285/30 R20- Section width
- 285 mm
- Aspect ratio
- 30%
- Sidewall
- 85.5 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 679.0 mm(26.73″)
- Circumference
- 2.133 m
- Revs / km
- 468.8
Real-world consequences
Pros / consWider tire (+40 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-10% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 100.1 km/h after switching to 285/30 R20 — a +0.06% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +0.2 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/40 R19
Back to
285/30 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/40 R19 and 285/30 R20.
245/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
245/40 R19 vs 275/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.52%
245/40 R19 vs 285/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.52%
225/45 R19 vs 245/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.95%
255/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.09%
245/40 R19 vs 255/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.18%
235/40 R19 vs 245/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.19%
245/40 R19 vs 265/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.55%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.