Fitment comparison

245/40 R20versus245/45 R19

Δ Ø -0.9 mmSpeedo -0.13%OEM-safe

245/40 R20 and 245/45 R19 are dimensionally near-identical — a swap with no meaningful speedometer impact.

Going from 245/40 R20 to 245/45 R19 is a minus-1 setup that adds sidewall on a smaller 19-inch wheel. This setup lands within OEM rolling-diameter tolerance. Extra sidewall absorbs impacts more readily — a sensible bias for daily commuting and broken pavement.

The dashboard reading stays essentially unchanged from the OEM calibration. Overall the swap sits inside the safe ±3% diameter window, so ABS, traction control and gearing behave normally.

TakeTypical choice for a dedicated winter or off-road setup where extra sidewall pays off.

Share

Quick fitment verdict

245/40 R20245/45 R19 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Clears fender

Width and diameter stay close to stock — arch clearance unchanged.

Speedometer Impact

-0.13%

At a true 100 km/h the dash reads 99.9 km/h — negligible.

Daily Driving

Drop-in swap

Geometry stays in OEM envelope — no surprises in traffic or on the highway.

Side-by-side telemetry

Dimensional read-out

Current

245/40 R20

Diameter
704.0 mm
Sidewall
98.0 mm
Wheel
20
Width
245 mm
NewNew

245/45 R19

Diameter
703.1 mm
Sidewall
110.3 mm
Wheel
19
Width
245 mm

Real-world effects

How this swap actually feels

  • Steering response
    38/100 · Softer turn-in
  • Ride comfort
    83/100 · More cushion
  • Fuel economy
    70/100 · Unchanged
  • Highway cruising
    59/100 · Higher cruise revs
  • Pothole resistance
    80/100 · More wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Identical stance

-0.5 mm

Virtually identical ride height — no visual stance change.

CurrentNew352 mm352 mmRIDE HEIGHT Δ-0.5 mm

Virtually identical ride height — no visual stance change.

Suspension travel · arch clearance

Wheel gap

Wheel gap stays virtually unchanged

-0.5 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

18px

245/40 R20

18px

245/45 R19

Wheel-gap Δ-0.5 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 99.9 km/h

-0.13%

Shorter rubber: dashboard reads conservatively low — you're slower than it claims.

020406080100120140KM/H-0.13%DRIFTINDICATED100 km/hACTUAL99.9 km/h

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 245/40 R20245/45 R19 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

+12.3 mm sidewall

Softer, more relaxed turn-in

Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.

Ride firmness

40% → 45%

Softer over potholes and joints

Bumps and expansion joints are absorbed better — a comfort win for daily driving.

Fender relationship

+0 mm width

Fender gap reads near-identical

Width delta is too small to change stance — same visual signature as OEM.

Speedometer behavior

-0.13%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø -0.9 mm

Drop-in swap, daily-safe

Geometry stays in the OEM envelope — no surprises in traffic, parking or on the highway.

Direct answer

Is 245/45 R19 OEM-safe?

Yes. Overall diameter changes by -0.13% versus 245/40 R20. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 245/45 R19 rub?

Unlikely. Width changes by +0 mm and diameter by -0.9 mm. Very unlikely to rub with OEM wheel offset.

Direct answer

Does the speedometer change?

Yes — by -0.13%. Swapping 245/40 R20 for 245/45 R19 changes overall diameter, so at an indicated 100 km/h your true speed becomes 99.9 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — softer ride. Sidewall changes by +12.3 mm (40% → 45%). Ride softens and absorbs bumps better, with slightly less precise turn-in.

Current Tire

245/40R20

New Tire

245/45R19

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

-0.9 mm

-0.13%

Speedometer at 100

99.9 km/h

-0.13% error

Ground clearance

-0.5 mm

ride height delta

Sidewall change

+12.3 mm

revs/km: 452.7

Permalink for this comparison:

/compare/245-40-r20-vs-245-45-r19

Detailed comparison

Metric245/40 R20245/45 R19Difference
Overall diameter704.0 mm703.1 mm-0.9 mm (-0.13%)
Sidewall height98.0 mm110.3 mm+12.3 mm
Circumference2.212 m2.209 m-2.8 mm
Revs / km452.1452.7+0.6
Ground clearancereference-0.5 mm-0.5 mm
Speedometer @ 100 km/h100.0 km/h99.9 km/h-0.13 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

245/40 R20
Width 245 mmSW 98Ø 704mmR20
Profile
40%
Circumference
2.212 m

New

245/45 R19
Width 245 mmSW 110Ø 703mmR19
Profile
45%
Circumference
2.209 m

Side-by-side fitment

Geometry

Current

245/40 R20
Section width
245 mm
Aspect ratio
40%
Sidewall
98.0 mm
Wheel diameter
20″(508 mm)
Overall diameter
704.0 mm(27.72″)
Circumference
2.212 m
Revs / km
452.1

New

245/45 R19
Section width
245 mm
Aspect ratio
45%
Sidewall
110.3 mm
Wheel diameter
19″(483 mm)
Overall diameter
703.1 mm(27.68″)
Circumference
2.209 m
Revs / km
452.7

Real-world consequences

Pros / cons

Taller sidewall (+5% aspect)

Sidewall
  • Plusher ride, better pothole and curb protection
  • More forgiving on bad roads and trails
  • Lower wheel-damage risk on impacts
  • More sidewall flex, softer steering feel
  • Slightly delayed turn-in response

-1″ rim downsize

Wheel diameter
  • Cheaper winter / track tire sizing
  • Lighter overall package, less unsprung mass
  • More sidewall = more impact absorption
  • Less aggressive stance
  • Possible brake caliper clearance issue going too small

How it changes driving feel

Seat-of-the-pants

Steering response

Similar feel

Ride comfort

Comparable

Road noise

Similar cabin noise

Wet / aquaplaning

Comparable wet behavior

Fuel economy

Negligible change

Curb / pothole protection

About the same

Cluster preview

Within tolerance
020406080100120140KM/H-0.13%DRIFTINDICATED100 km/hACTUAL99.9 km/h

Speedometer impact

At a true 100 km/h, your dashboard will read 99.9 km/h after switching to 245/45 R19 — a -0.13% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by -0.5 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

245/40 R20

Back to

245/45 R19

Drivers also compare

Closely-related fitments and plus-size swaps for 245/40 R20 and 245/45 R19.

Related topics

Comparison hub

Back to the tire size comparison calculator

Browse every wheel and tire fitment comparison, by rim size or popularity.

Share

Frequently asked questions