OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
245/45 R18versus285/30 R20
Δ Ø +1.3 mmSpeedo +0.19%OEM-safe
285/30 R20 stands taller than 245/45 R18 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
285/30 R20 is a plus-2 alternative to 245/45 R18 — the bigger wheel shows through a thinner sidewall. This tire combination lands within OEM rolling-diameter tolerance.
The dashboard reading stays essentially unchanged from the OEM calibration. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides. Extra width broadens the footprint for more grip, but check inner liner and strut clearance before fitting. Visually, the bigger wheel fills the arch and gives the car a more aggressive stance. Overall the swap sits inside the safe ±3% diameter window, so ABS, traction control and gearing behave normally.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/45 R18 → 285/30 R20 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+0.19%
At a true 100 km/h the dash reads 100.2 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
245/45 R18
- Diameter
- 677.7 mm
- Sidewall
- 110.3 mm
- Wheel
- 18″
- Width
- 245 mm
Δ delta
Ø +1.3 mm
SW -24.8 mm
RH +0.6 mm
NewNew
285/30 R20
- Diameter
- 679.0 mm
- Sidewall
- 85.5 mm
- Wheel
- 20″
- Width
- 285 mm
Real-world effects
How this swap actually feels
- Steering response100/100 · Sharper turn-in
- Ride comfort20/100 · Firmer ride
- Fuel economy22/100 · Slightly higher drag
- Highway cruising61/100 · Lower cruise revs
- Pothole resistance10/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~0.6 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap stays virtually unchanged
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/45 R18
285/30 R20
Wheel-gap Δ+0.6 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 100.2 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/45 R18 → 285/30 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-24.8 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
45% → 30%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+40 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+0.19%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø +1.3 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 285/30 R20 OEM-safe?
Yes. Overall diameter changes by +0.19% versus 245/45 R18. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 285/30 R20 rub?
Possibly. Width changes by +40 mm and diameter by +1.3 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +0.19%. Swapping 245/45 R18 for 285/30 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.2 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -24.8 mm (45% → 30%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
245/45R18
New Tire
285/30R20
Fitment · Scaled comparison
● Excellent fit
245/45 R18
Diameter
+1.3 mm
+0.19%
Sidewall
-24.8 mm
Speedometer
100.2 km/h
at true 100
Clearance
Excellent fit
285/30 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
+1.3 mm
0.19%
Speedometer at 100
100.2 km/h
+0.19% error
Ground clearance
+0.6 mm
ride height delta
Sidewall change
-24.8 mm
revs/km: 468.8
Permalink for this comparison:
/compare/245-45-r18-vs-285-30-r20Detailed comparison
| Metric | 245/45 R18 | 285/30 R20 | Difference |
|---|---|---|---|
| Overall diameter | 677.7 mm | 679.0 mm | +1.3 mm (+0.19%) |
| Sidewall height | 110.3 mm | 85.5 mm | -24.8 mm |
| Circumference | 2.129 m | 2.133 m | +4.1 mm |
| Revs / km | 469.7 | 468.8 | -0.9 |
| Ground clearance | reference | +0.6 mm | +0.6 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 100.2 km/h | +0.19 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/45 R18- Profile
- 45%
- Circumference
- 2.129 m
New
285/30 R20- Profile
- 30%
- Circumference
- 2.133 m
Side-by-side fitment
GeometryCurrent
245/45 R18- Section width
- 245 mm
- Aspect ratio
- 45%
- Sidewall
- 110.3 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 677.7 mm(26.68″)
- Circumference
- 2.129 m
- Revs / km
- 469.7
New
285/30 R20- Section width
- 285 mm
- Aspect ratio
- 30%
- Sidewall
- 85.5 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 679.0 mm(26.73″)
- Circumference
- 2.133 m
- Revs / km
- 468.8
Real-world consequences
Pros / consWider tire (+40 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-15% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+2″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 100.2 km/h after switching to 285/30 R20 — a +0.19% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +0.6 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/45 R18
Back to
285/30 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/45 R18 and 285/30 R20.
245/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
245/45 R18 vs 275/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
225/50 R18 vs 245/45 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.66%
255/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.09%
245/45 R18 vs 265/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.25%
245/45 R18 vs 255/45 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.33%
235/45 R18 vs 245/45 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.35%
285/30 R20 vs 305/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.77%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.