OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
245/45 R19versus245/40 R20
Δ Ø +0.9 mmSpeedo +0.13%OEM-safe
245/40 R20 stands taller than 245/45 R19 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Switching from 245/45 R19 to 245/40 R20 is a plus-1 upgrade that wraps a shorter sidewall around a larger 20-inch wheel. This setup keeps overall diameter very close to stock. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides.
The dashboard reading stays essentially unchanged from the OEM calibration. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/45 R19 → 245/40 R20 at a glance
Fender Clearance
Clears fender
Width and diameter stay close to stock — arch clearance unchanged.
Speedometer Impact
+0.13%
At a true 100 km/h the dash reads 100.1 km/h — negligible.
Daily Driving
Drop-in swap
Geometry stays in OEM envelope — no surprises in traffic or on the highway.
Side-by-side telemetry
Dimensional read-out
Current
245/45 R19
- Diameter
- 703.1 mm
- Sidewall
- 110.3 mm
- Wheel
- 19″
- Width
- 245 mm
Δ delta
Ø +0.9 mm
SW -12.3 mm
RH +0.5 mm
NewNew
245/40 R20
- Diameter
- 704.0 mm
- Sidewall
- 98.0 mm
- Wheel
- 20″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response80/100 · Sharper turn-in
- Ride comfort40/100 · Firmer ride
- Fuel economy70/100 · Unchanged
- Highway cruising61/100 · Lower cruise revs
- Pothole resistance33/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~0.5 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap stays virtually unchanged
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/45 R19
245/40 R20
Wheel-gap Δ+0.5 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 100.1 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/45 R19 → 245/40 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-12.3 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
45% → 40%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+0 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
+0.13%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø +0.9 mmDrop-in swap, daily-safe
Geometry stays in the OEM envelope — no surprises in traffic, parking or on the highway.
Direct answer
Is 245/40 R20 OEM-safe?
Yes. Overall diameter changes by +0.13% versus 245/45 R19. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 245/40 R20 rub?
Unlikely. Width changes by +0 mm and diameter by +0.9 mm. Very unlikely to rub with OEM wheel offset.
Direct answer
Does the speedometer change?
Yes — by +0.13%. Swapping 245/45 R19 for 245/40 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.1 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -12.3 mm (45% → 40%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
245/45R19
New Tire
245/40R20
Fitment · Scaled comparison
● Excellent fit
245/45 R19
Diameter
+0.9 mm
+0.13%
Sidewall
-12.3 mm
Speedometer
100.1 km/h
at true 100
Clearance
Excellent fit
245/40 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
+0.9 mm
0.13%
Speedometer at 100
100.1 km/h
+0.13% error
Ground clearance
+0.5 mm
ride height delta
Sidewall change
-12.3 mm
revs/km: 452.1
Permalink for this comparison:
/compare/245-45-r19-vs-245-40-r20Detailed comparison
| Metric | 245/45 R19 | 245/40 R20 | Difference |
|---|---|---|---|
| Overall diameter | 703.1 mm | 704.0 mm | +0.9 mm (+0.13%) |
| Sidewall height | 110.3 mm | 98.0 mm | -12.3 mm |
| Circumference | 2.209 m | 2.212 m | +2.8 mm |
| Revs / km | 452.7 | 452.1 | -0.6 |
| Ground clearance | reference | +0.5 mm | +0.5 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 100.1 km/h | +0.13 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/45 R19- Profile
- 45%
- Circumference
- 2.209 m
New
245/40 R20- Profile
- 40%
- Circumference
- 2.212 m
Side-by-side fitment
GeometryCurrent
245/45 R19- Section width
- 245 mm
- Aspect ratio
- 45%
- Sidewall
- 110.3 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 703.1 mm(27.68″)
- Circumference
- 2.209 m
- Revs / km
- 452.7
New
245/40 R20- Section width
- 245 mm
- Aspect ratio
- 40%
- Sidewall
- 98.0 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 704.0 mm(27.72″)
- Circumference
- 2.212 m
- Revs / km
- 452.1
Real-world consequences
Pros / consLower profile (-5% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Similar feel
Ride comfort
Harsher impacts
Road noise
Similar cabin noise
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Negligible change
Curb / pothole protection
Higher wheel-damage risk
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 100.1 km/h after switching to 245/40 R20 — a +0.13% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +0.5 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/45 R19
Back to
245/40 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/45 R19 and 245/40 R20.
245/45 R19 vs 275/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
245/40 R20 vs 275/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.50%
245/40 R20 vs 285/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.50%
245/45 R19 vs 255/45 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.28%
245/40 R20 vs 265/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.49%
245/40 R20 vs 295/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.49%
245/40 R20 vs 305/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.85%
245/40 R20 vs 265/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.27%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.