OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
245/45 R19versus255/35 R20
Δ Ø -16.6 mmSpeedo -2.36%OEM-safe
255/35 R20 is shorter than 245/45 R19 — quicker gearing feel, tighter arch gap, livelier throttle response.
Going from 245/45 R19 to 255/35 R20 steps up to a 20-inch rim while trimming sidewall to stay near OEM rolling diameter. This alternative fitment moves rolling diameter a touch off the original spec. The speedometer offset is small but measurable; worth keeping in mind if you watch the dash closely. The shorter sidewall gives the tire a firmer, more responsive feel and sharpens steering input. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/45 R19 → 255/35 R20 at a glance
Fender Clearance
Clears fender
Width and diameter stay close to stock — arch clearance unchanged.
Speedometer Impact
-2.36%
At a true 100 km/h the dash reads 97.6 km/h — negligible.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
245/45 R19
- Diameter
- 703.1 mm
- Sidewall
- 110.3 mm
- Wheel
- 19″
- Width
- 245 mm
Δ delta
Ø -16.6 mm
SW -21.0 mm
RH -8.3 mm
NewNew
255/35 R20
- Diameter
- 686.5 mm
- Sidewall
- 89.3 mm
- Wheel
- 20″
- Width
- 255 mm
Real-world effects
How this swap actually feels
- Steering response94/100 · Sharper turn-in
- Ride comfort26/100 · Firmer ride
- Fuel economy53/100 · Slightly higher drag
- Highway cruising50/100 · Higher cruise revs
- Pothole resistance17/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lower stance
Chassis drops — tighter arch gap, more aggressive stance.
New tire drops ride height by ~8.3 mm — tighter arch gap, lower stance.
Suspension travel · arch clearance
Wheel gap
Wheel sits closer to the fender
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/45 R19
255/35 R20
Wheel-gap Δ-8.3 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 97.6 km/h
Shorter rubber: dashboard reads conservatively low — you're slower than it claims.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/45 R19 → 255/35 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-21.0 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
45% → 35%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+10 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
-2.36%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø -16.6 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 255/35 R20 OEM-safe?
Yes. Overall diameter changes by -2.36% versus 245/45 R19. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 255/35 R20 rub?
Borderline. Width changes by +10 mm and diameter by -16.6 mm. Borderline — check fender lip and inner strut clearance under load.
Direct answer
Does the speedometer change?
Yes — by -2.36%. Swapping 245/45 R19 for 255/35 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 97.6 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -21.0 mm (45% → 35%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
245/45R19
New Tire
255/35R20
Fitment · Scaled comparison
● Excellent fit
245/45 R19
Diameter
-16.6 mm
-2.36%
Sidewall
-21.0 mm
Speedometer
97.6 km/h
at true 100
Clearance
Excellent fit
255/35 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
-16.6 mm
-2.36%
Speedometer at 100
97.6 km/h
-2.36% error
Ground clearance
-8.3 mm
ride height delta
Sidewall change
-21.0 mm
revs/km: 463.7
Permalink for this comparison:
/compare/245-45-r19-vs-255-35-r20Detailed comparison
| Metric | 245/45 R19 | 255/35 R20 | Difference |
|---|---|---|---|
| Overall diameter | 703.1 mm | 686.5 mm | -16.6 mm (-2.36%) |
| Sidewall height | 110.3 mm | 89.3 mm | -21.0 mm |
| Circumference | 2.209 m | 2.157 m | -52.2 mm |
| Revs / km | 452.7 | 463.7 | +10.9 |
| Ground clearance | reference | -8.3 mm | -8.3 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 97.6 km/h | -2.36 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/45 R19- Profile
- 45%
- Circumference
- 2.209 m
New
255/35 R20- Profile
- 35%
- Circumference
- 2.157 m
Side-by-side fitment
GeometryCurrent
245/45 R19- Section width
- 245 mm
- Aspect ratio
- 45%
- Sidewall
- 110.3 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 703.1 mm(27.68″)
- Circumference
- 2.209 m
- Revs / km
- 452.7
New
255/35 R20- Section width
- 255 mm
- Aspect ratio
- 35%
- Sidewall
- 89.3 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 686.5 mm(27.03″)
- Circumference
- 2.157 m
- Revs / km
- 463.7
Real-world consequences
Pros / consWider tire (+10 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-10% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
Shorter overall (-16.6 mm)
Rolling diameter- Shorter effective gearing — perkier acceleration
- Lower center of gravity, sharper transitions
- More fender and arch clearance
- Speedometer reads high by ~2.4%
- Engine spins higher at cruise, small MPG hit
- ABS / ESP recalibration may be advisable
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Check fender clearance, especially with lower offset wheels.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 97.6 km/h after switching to 255/35 R20 — a -2.36% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by -8.3 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/45 R19
Back to
255/35 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/45 R19 and 255/35 R20.
245/45 R19 vs 275/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
255/35 R20 vs 305/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.66%
255/35 R20 vs 265/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.02%
245/35 R20 vs 255/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.03%
255/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.09%
245/45 R19 vs 255/45 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.28%
255/35 R20 vs 275/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.04%
245/45 R19 vs 255/40 R19
Wider variation on the same rim — more grip, less clearance.
Δ 2.35%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.