Fitment comparison

245/45 R20versus255/45 R20

Δ Ø +9.0 mmSpeedo +1.24%OEM-safe

255/45 R20 stands taller than 245/45 R20 — bigger rolling diameter, slightly more clearance, calmer cruise revs.

Stepping from 245/45 R20 to 255/45 R20 keeps the 20-inch wheel but widens the section by 10 mm. This alternative fitment barely shifts the rolling circumference. More tread on the ground tends to improve dry grip and stance, with a small fuel-economy and clearance tradeoff.

Speedometer drift stays small enough that most drivers won't notice it day to day. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.

TakeReasonable performance-leaning swap as long as fender and suspension clearance check out.

Share

Quick fitment verdict

245/45 R20255/45 R20 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Check at lock

Wider or taller setup — verify clearance at full steering lock and over bumps.

Speedometer Impact

+1.24%

At a true 100 km/h the dash reads 101.2 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

245/45 R20

Diameter
728.5 mm
Sidewall
110.3 mm
Wheel
20
Width
245 mm
NewNew

255/45 R20

Diameter
737.5 mm
Sidewall
114.8 mm
Wheel
20
Width
255 mm

Real-world effects

How this swap actually feels

  • Steering response
    53/100 · Softer turn-in
  • Ride comfort
    67/100 · More cushion
  • Fuel economy
    55/100 · Slightly higher drag
  • Highway cruising
    65/100 · Lower cruise revs
  • Pothole resistance
    63/100 · More wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lifted stance

+4.5 mm

Chassis sits higher — slightly more clearance, wheel-gap visually grows.

CurrentNew364 mm369 mmRIDE HEIGHT Δ+4.5 mm

New tire lifts the chassis by ~4.5 mm — more clearance, slightly more wheel-gap.

Suspension travel · arch clearance

Wheel gap

Wheel gap visually increases

+4.5 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

18px

245/45 R20

20px

255/45 R20

Wheel-gap Δ+4.5 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 101.2 km/h

+1.24%

Taller rubber: at a true 100 km/h your dashboard reads optimistically high.

020406080100120140KM/H+1.24%DRIFTINDICATED100 km/hACTUAL101.2 km/h

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 245/45 R20255/45 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

+4.5 mm sidewall

Softer, more relaxed turn-in

Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.

Ride firmness

45% → 45%

Softer over potholes and joints

Bumps and expansion joints are absorbed better — a comfort win for daily driving.

Fender relationship

+10 mm width

Fender gap reads near-identical

Width delta is too small to change stance — same visual signature as OEM.

Speedometer behavior

+1.24%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø +9.0 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 255/45 R20 OEM-safe?

Yes. Overall diameter changes by +1.24% versus 245/45 R20. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 255/45 R20 rub?

Unlikely. Width changes by +10 mm and diameter by +9.0 mm. Very unlikely to rub with OEM wheel offset.

Direct answer

Does the speedometer change?

Yes — by +1.24%. Swapping 245/45 R20 for 255/45 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 101.2 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — softer ride. Sidewall changes by +4.5 mm (45% → 45%). Ride softens and absorbs bumps better, with slightly less precise turn-in.

Current Tire

245/45R20

New Tire

255/45R20

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

+9.0 mm

1.24%

Speedometer at 100

101.2 km/h

+1.24% error

Ground clearance

+4.5 mm

ride height delta

Sidewall change

+4.5 mm

revs/km: 431.6

Permalink for this comparison:

/compare/245-45-r20-vs-255-45-r20

Detailed comparison

Metric245/45 R20255/45 R20Difference
Overall diameter728.5 mm737.5 mm+9.0 mm (+1.24%)
Sidewall height110.3 mm114.8 mm+4.5 mm
Circumference2.289 m2.317 m+28.3 mm
Revs / km436.9431.6-5.3
Ground clearancereference+4.5 mm+4.5 mm
Speedometer @ 100 km/h100.0 km/h101.2 km/h+1.24 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

245/45 R20
Width 245 mmSW 110Ø 729mmR20
Profile
45%
Circumference
2.289 m

New

255/45 R20
Width 255 mmSW 115Ø 738mmR20
Profile
45%
Circumference
2.317 m

Side-by-side fitment

Geometry

Current

245/45 R20
Section width
245 mm
Aspect ratio
45%
Sidewall
110.3 mm
Wheel diameter
20″(508 mm)
Overall diameter
728.5 mm(28.68″)
Circumference
2.289 m
Revs / km
436.9

New

255/45 R20
Section width
255 mm
Aspect ratio
45%
Sidewall
114.8 mm
Wheel diameter
20″(508 mm)
Overall diameter
737.5 mm(29.04″)
Circumference
2.317 m
Revs / km
431.6

Real-world consequences

Pros / cons

Wider tire (+10 mm)

Section width
  • More dry grip and cornering bite
  • Sharper steering response on initial turn-in
  • Bigger contact patch under braking
  • More road noise on coarse asphalt
  • Worse aquaplaning resistance in standing water
  • Higher rolling resistance, small MPG hit
  • Possible fender or strut contact at full lock

How it changes driving feel

Seat-of-the-pants

Steering response

Similar feel

Ride comfort

Comparable

Road noise

Similar cabin noise

Wet / aquaplaning

Comparable wet behavior

Fuel economy

Small MPG penalty likely

Curb / pothole protection

About the same

Fitment risk check

Verify before install
Fender rubbing

Check fender clearance, especially with lower offset wheels.

Suspension clearance

Wider tire may contact strut or control arm on full compression.

Cluster preview

Within tolerance
020406080100120140KM/H+1.24%DRIFTINDICATED100 km/hACTUAL101.2 km/h

Speedometer impact

At a true 100 km/h, your dashboard will read 101.2 km/h after switching to 255/45 R20 — a +1.24% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by +4.5 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

245/45 R20

Back to

255/45 R20

Drivers also compare

Closely-related fitments and plus-size swaps for 245/45 R20 and 255/45 R20.

Related topics

Comparison hub

Back to the tire size comparison calculator

Browse every wheel and tire fitment comparison, by rim size or popularity.

Share

Frequently asked questions