OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
245/60 R18versus255/50 R20
Δ Ø +11.8 mmSpeedo +1.57%OEM-safe
255/50 R20 stands taller than 245/60 R18 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
255/50 R20 is a plus-2 alternative to 245/60 R18 — the bigger wheel shows through a thinner sidewall. This alternative fitment moves rolling diameter a touch off the original spec.
The speedometer offset is small but measurable; worth keeping in mind if you watch the dash closely. The shorter sidewall gives the tire a firmer, more responsive feel and sharpens steering input. More tread on the ground tends to improve dry grip and stance, with a small fuel-economy and clearance tradeoff. The larger wheel shows more of the brake hardware and tightens up the wheel-gap look. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.
Quick fitment verdict
245/60 R18 → 255/50 R20 at a glance
Fender Clearance
Check at lock
Wider or taller setup — verify clearance at full steering lock and over bumps.
Speedometer Impact
+1.57%
At a true 100 km/h the dash reads 101.6 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
245/60 R18
- Diameter
- 751.2 mm
- Sidewall
- 147.0 mm
- Wheel
- 18″
- Width
- 245 mm
Δ delta
Ø +11.8 mm
SW -19.5 mm
RH +5.9 mm
NewNew
255/50 R20
- Diameter
- 763.0 mm
- Sidewall
- 127.5 mm
- Wheel
- 20″
- Width
- 255 mm
Real-world effects
How this swap actually feels
- Steering response84/100 · Sharper turn-in
- Ride comfort36/100 · Firmer ride
- Fuel economy54/100 · Slightly higher drag
- Highway cruising67/100 · Lower cruise revs
- Pothole resistance28/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~5.9 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/60 R18
255/50 R20
Wheel-gap Δ+5.9 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 101.6 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/60 R18 → 255/50 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-19.5 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
60% → 50%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
+10 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
+1.57%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø +11.8 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 255/50 R20 OEM-safe?
Yes. Overall diameter changes by +1.57% versus 245/60 R18. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 255/50 R20 rub?
Borderline. Width changes by +10 mm and diameter by +11.8 mm. Borderline — check fender lip and inner strut clearance under load.
Direct answer
Does the speedometer change?
Yes — by +1.57%. Swapping 245/60 R18 for 255/50 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 101.6 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -19.5 mm (60% → 50%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
245/60R18
New Tire
255/50R20
Fitment · Scaled comparison
● Excellent fit
245/60 R18
Diameter
+11.8 mm
+1.57%
Sidewall
-19.5 mm
Speedometer
101.6 km/h
at true 100
Clearance
Excellent fit
255/50 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
+11.8 mm
1.57%
Speedometer at 100
101.6 km/h
+1.57% error
Ground clearance
+5.9 mm
ride height delta
Sidewall change
-19.5 mm
revs/km: 417.2
Permalink for this comparison:
/compare/245-60-r18-vs-255-50-r20Detailed comparison
| Metric | 245/60 R18 | 255/50 R20 | Difference |
|---|---|---|---|
| Overall diameter | 751.2 mm | 763.0 mm | +11.8 mm (+1.57%) |
| Sidewall height | 147.0 mm | 127.5 mm | -19.5 mm |
| Circumference | 2.360 m | 2.397 m | +37.1 mm |
| Revs / km | 423.7 | 417.2 | -6.6 |
| Ground clearance | reference | +5.9 mm | +5.9 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 101.6 km/h | +1.57 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/60 R18- Profile
- 60%
- Circumference
- 2.360 m
New
255/50 R20- Profile
- 50%
- Circumference
- 2.397 m
Side-by-side fitment
GeometryCurrent
245/60 R18- Section width
- 245 mm
- Aspect ratio
- 60%
- Sidewall
- 147.0 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 751.2 mm(29.57″)
- Circumference
- 2.360 m
- Revs / km
- 423.7
New
255/50 R20- Section width
- 255 mm
- Aspect ratio
- 50%
- Sidewall
- 127.5 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 763.0 mm(30.04″)
- Circumference
- 2.397 m
- Revs / km
- 417.2
Real-world consequences
Pros / consWider tire (+10 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-10% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
Taller overall (+11.8 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~1.6%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
+2″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Check fender clearance, especially with lower offset wheels.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 101.6 km/h after switching to 255/50 R20 — a +1.57% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +5.9 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/60 R18
Back to
255/50 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 245/60 R18 and 255/50 R20.
255/50 R20 vs 275/45 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.98%
255/50 R20 vs 265/50 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.31%
235/60 R18 vs 245/60 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.62%
245/60 R18 vs 255/55 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.80%
255/50 R20 vs 295/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.49%
245/60 R18 vs 265/60 R18
Wider variation on the same rim — more grip, less clearance.
Δ 3.19%
255/45 R20 vs 255/50 R20
Same wheel, taller sidewall for extra cushioning.
Δ 3.46%
255/50 R20 vs 275/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 4.59%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.