OEM Safe
Borderline
Noticeable drift from OEM — drivable, but recalibration is wise.
Fitment comparison
245/60 R18versus335/55 R16
Δ Ø +23.7 mmSpeedo +3.15%Borderline
335/55 R16 stands taller than 245/60 R18 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Minus-sizing from 245/60 R18 to 335/55 R16 pairs a smaller 16-inch wheel with more rubber between the rim and road. This swap swings rolling diameter far enough to feel on the road.
Indicated speed will drift far enough that recalibration is worth considering. Less sidewall flex usually translates to crisper turn-in and a slightly stiffer ride over rough pavement. Extra width broadens the footprint for more grip, but check inner liner and strut clearance before fitting. The smaller wheel is also lighter and easier to find affordable winter rubber for. Diameter delta falls in the cautious 3–5% range, where speedometer recalibration and a careful clearance check are worth doing.
TakeTypical choice for a dedicated winter or off-road setup where extra sidewall pays off.
Quick fitment verdict
245/60 R18 → 335/55 R16 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+3.15%
Dash reads 103.2 km/h at a true 100 km/h — visible drift.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
245/60 R18
- Diameter
- 751.2 mm
- Sidewall
- 147.0 mm
- Wheel
- 18″
- Width
- 245 mm
Δ delta
Ø +23.7 mm
SW +37.3 mm
RH +11.8 mm
NewNew
335/55 R16
- Diameter
- 774.9 mm
- Sidewall
- 184.3 mm
- Wheel
- 16″
- Width
- 335 mm
Real-world effects
How this swap actually feels
- Steering response14/100 · Softer turn-in
- Ride comfort100/100 · More cushion
- Fuel economy4/100 · Slightly higher drag
- Highway cruising74/100 · Lower cruise revs
- Pothole resistance100/100 · More wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~11.8 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
245/60 R18
335/55 R16
Wheel-gap Δ+11.8 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 103.2 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 245/60 R18 → 335/55 R16 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
+37.3 mm sidewallSofter, more relaxed turn-in
Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.
Ride firmness
60% → 55%Softer over potholes and joints
Bumps and expansion joints are absorbed better — a comfort win for daily driving.
Fender relationship
+90 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+3.15%Noticeable speedo drift
Drift is visible at highway speeds; ABS still works but loses a sliver of precision.
Daily drivability
Ø +23.7 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 335/55 R16 OEM-safe?
Borderline. Overall diameter changes by +3.15% versus 245/60 R18. Borderline. Drivable, but speedometer drift becomes noticeable and ABS calibration is affected.
Direct answer
Will 335/55 R16 rub?
Possibly. Width changes by +90 mm and diameter by +23.7 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +3.15%. Swapping 245/60 R18 for 335/55 R16 changes overall diameter, so at an indicated 100 km/h your true speed becomes 103.2 km/h. That's noticeable drift but usually safe.
Direct answer
Does lower sidewall affect comfort?
Yes — softer ride. Sidewall changes by +37.3 mm (60% → 55%). Ride softens and absorbs bumps better, with slightly less precise turn-in.
Current Tire
245/60R18
New Tire
335/55R16
Fitment · Scaled comparison
● Borderline
245/60 R18
Diameter
+23.7 mm
+3.15%
Sidewall
+37.3 mm
Speedometer
103.2 km/h
at true 100
Clearance
Borderline
335/55 R16
Ground line · Scaled comparison
Slight Difference
Within ±5% — usable, recalibration recommended
Diameter change
+23.7 mm
3.15%
Speedometer at 100
103.2 km/h
+3.15% error
Ground clearance
+11.8 mm
ride height delta
Sidewall change
+37.3 mm
revs/km: 410.8
Permalink for this comparison:
/compare/245-60-r18-vs-335-55-r16Detailed comparison
| Metric | 245/60 R18 | 335/55 R16 | Difference |
|---|---|---|---|
| Overall diameter | 751.2 mm | 774.9 mm | +23.7 mm (+3.15%) |
| Sidewall height | 147.0 mm | 184.3 mm | +37.3 mm |
| Circumference | 2.360 m | 2.434 m | +74.5 mm |
| Revs / km | 423.7 | 410.8 | -13.0 |
| Ground clearance | reference | +11.8 mm | +11.8 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 103.2 km/h | +3.15 km/h |
Verdict: warning
Between 3% and 5% — noticeable speedometer drift; recalibration may be advisable.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
245/60 R18- Profile
- 60%
- Circumference
- 2.360 m
New
335/55 R16- Profile
- 55%
- Circumference
- 2.434 m
Side-by-side fitment
GeometryCurrent
245/60 R18- Section width
- 245 mm
- Aspect ratio
- 60%
- Sidewall
- 147.0 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 751.2 mm(29.57″)
- Circumference
- 2.360 m
- Revs / km
- 423.7
New
335/55 R16- Section width
- 335 mm
- Aspect ratio
- 55%
- Sidewall
- 184.3 mm
- Wheel diameter
- 16″(406 mm)
- Overall diameter
- 774.9 mm(30.51″)
- Circumference
- 2.434 m
- Revs / km
- 410.8
Real-world consequences
Pros / consWider tire (+90 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Lower profile (-5% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
Taller overall (+23.7 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~3.2%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
-2″ rim downsize
Wheel diameter- Cheaper winter / track tire sizing
- Lighter overall package, less unsprung mass
- More sidewall = more impact absorption
- Less aggressive stance
- Possible brake caliper clearance issue going too small
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Harsher impacts
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
Higher wheel-damage risk
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Speedometer drift
~3.2% — borderline; recalibration recommended.
Cluster preview
BorderlineSpeedometer impact
At a true 100 km/h, your dashboard will read 103.2 km/h after switching to 335/55 R16 — a +3.15% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +11.8 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
245/60 R18
Back to
335/55 R16
Drivers also compare
Closely-related fitments and plus-size swaps for 245/60 R18 and 335/55 R16.
235/60 R18 vs 245/60 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.62%
245/60 R18 vs 255/55 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.80%
245/60 R18 vs 265/60 R18
Wider variation on the same rim — more grip, less clearance.
Δ 3.19%
235/55 R18 vs 245/60 R18
Wider variation on the same rim — more grip, less clearance.
Δ 4.96%
245/60 R18 vs 245/65 R17
Popular +1 inch upgrade with minimal speedometer change.
Δ 0.12%
245/60 R18 vs 245/70 R16
Plus-two upgrade — bigger wheel, much shorter sidewall.
Δ 0.24%
245/60 R18 vs 275/45 R20
Plus-two upgrade — bigger wheel, much shorter sidewall.
Δ 0.57%
245/60 R18 vs 295/40 R20
Plus-two upgrade — bigger wheel, much shorter sidewall.
Δ 0.96%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.