Which tire is taller, 245/65 R17 or 265/50 R20?

265/50 R20 is taller by 22.7 mm (3.03%) compared with 245/65 R17.

What is the diameter difference between 245/65 R17 and 265/50 R20?

245/65 R17 measures 750 mm overall diameter, 265/50 R20 measures 773 mm — a difference of 22.7 mm (3.03%).

How much speedometer error does this change create?

Switching from 245/65 R17 to 265/50 R20 changes the speedometer reading by +3.03%. At an indicated 100 km/h, your true speed becomes about 103.0 km/h.

Is 265/50 R20 a safe replacement for 245/65 R17?

Between 3% and 5% diameter difference — speedometer drift is noticeable. Consider recalibration and confirm clearance with your vehicle's manufacturer specification.

What else should I check before changing tire size?

Beyond diameter and speedometer error, verify wheel offset (ET), rim width, hub bore, load index, brake and suspension clearance, and your vehicle's manufacturer specification. Local regulations may also limit how far you can deviate from OEM.

Fitment comparison

245/65 R17versus265/50 R20

Δ Ø +22.7 mmSpeedo +3.03%Borderline

265/50 R20 stands taller than 245/65 R17 — bigger rolling diameter, slightly more clearance, calmer cruise revs.

265/50 R20 is a plus-3 alternative to 245/65 R17 — the bigger wheel shows through a thinner sidewall. This wheel and tire pairing moves rolling diameter well outside the usual OEM tolerance. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides.

The speedometer error is noticeable and may warrant a recalibration if you rely on indicated speed. The 3–5% diameter gap puts this in caution territory: doable on many cars, but verify clearance and consider recalibration.

TakeA solid pick for drivers chasing a more aggressive stance without abandoning OEM rolling diameter.

Quick fitment verdict

245/65 R17 → 265/50 R20 at a glance

OEM Safe

Borderline

Noticeable drift from OEM — drivable, but recalibration is wise.

Fender Clearance

Likely rubs

Significantly wider/taller — rubbing risk on liners or fender lip is real.

Speedometer Impact

+3.03%

Dash reads 103.0 km/h at a true 100 km/h — visible drift.

Daily Driving

Aggressive

Geometry deviates enough to matter — confirm clearance before daily use.

Side-by-side telemetry

Dimensional read-out

Current

245/65 R17

Diameter: 750.3 mm
Sidewall: 159.3 mm
Wheel: 17″
Width: 245 mm

Δ delta

Ø +22.7 mm

SW -26.8 mm

RH +11.4 mm

NewNew

265/50 R20

Diameter: 773.0 mm
Sidewall: 132.5 mm
Wheel: 20″
Width: 265 mm

Real-world effects

How this swap actually feels

Steering response
90/100 · Sharper turn-in
Ride comfort
30/100 · Firmer ride
Fuel economy
39/100 · Slightly higher drag
Highway cruising
74/100 · Lower cruise revs
Pothole resistance
21/100 · Less wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lifted stance

+11.4 mm

Chassis sits higher — slightly more clearance, wheel-gap visually grows.

New tire lifts the chassis by ~11.4 mm — more clearance, slightly more wheel-gap.

Suspension travel · arch clearance

Wheel gap

Wheel gap visually increases

+11.4 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

245/65 R17

265/50 R20

Wheel-gap Δ+11.4 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 103.0 km/h

+3.03%

Taller rubber: at a true 100 km/h your dashboard reads optimistically high.

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 245/65 R17 → 265/50 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

-26.8 mm sidewall

Sharper steering response

Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.

Ride firmness

65% → 50%

Slightly firmer over rough pavement

Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.

Fender relationship

+20 mm width

Wheel sits closer to the fender

Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.

Speedometer behavior

+3.03%

Noticeable speedo drift

Drift is visible at highway speeds; ABS still works but loses a sliver of precision.

Daily drivability

Ø +22.7 mm

Aggressive setup — verify before daily use

Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.

Direct answer

Is 265/50 R20 OEM-safe?

Borderline. Overall diameter changes by +3.03% versus 245/65 R17. Borderline. Drivable, but speedometer drift becomes noticeable and ABS calibration is affected.

Direct answer

Will 265/50 R20 rub?

Possibly. Width changes by +20 mm and diameter by +22.7 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.

Direct answer

Does the speedometer change?

Yes — by +3.03%. Swapping 245/65 R17 for 265/50 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 103.0 km/h. That's noticeable drift but usually safe.

Direct answer

Does lower sidewall affect comfort?

Yes — firmer ride. Sidewall changes by -26.8 mm (65% → 50%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.

Current Tire

245/65R17

Width

Ratio

Rim

New Tire

265/50R20

Width

Ratio

Rim

Fitment · Scaled comparison

● Borderline

245/65 R17

Diameter

+22.7 mm

+3.03%

Sidewall

-26.8 mm

Speedometer

103.0 km/h

at true 100

Clearance

Borderline

265/50 R20

Ground line · Scaled comparison

Slight Difference

Within ±5% — usable, recalibration recommended

Diameter change

+22.7 mm

3.03%

Speedometer at 100

103.0 km/h

+3.03% error

Ground clearance

+11.4 mm

ride height delta

Sidewall change

-26.8 mm

revs/km: 411.8

Open visual comparisonCompare visually

Permalink for this comparison:

/compare/245-65-r17-vs-265-50-r20

Detailed comparison

Metric	245/65 R17	265/50 R20	Difference
Overall diameter	750.3 mm	773.0 mm	+22.7 mm (+3.03%)
Sidewall height	159.3 mm	132.5 mm	-26.8 mm
Circumference	2.357 m	2.428 m	+71.3 mm
Revs / km	424.2	411.8	-12.5
Ground clearance	reference	+11.4 mm	+11.4 mm
Speedometer @ 100 km/h	100.0 km/h	103.0 km/h	+3.03 km/h

Verdict: warning

Between 3% and 5% — noticeable speedometer drift; recalibration may be advisable.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

245/65 R17

Profile: 65%
Circumference: 2.357 m

New

265/50 R20

Profile: 50%
Circumference: 2.428 m

Side-by-side fitment

Geometry

Current

245/65 R17

Section width: 245 mm
Aspect ratio: 65%
Sidewall: 159.3 mm
Wheel diameter: 17″(432 mm)
Overall diameter: 750.3 mm(29.54″)
Circumference: 2.357 m
Revs / km: 424.2

New

265/50 R20

Section width: 265 mm
Aspect ratio: 50%
Sidewall: 132.5 mm
Wheel diameter: 20″(508 mm)
Overall diameter: 773.0 mm(30.43″)
Circumference: 2.428 m
Revs / km: 411.8

Real-world consequences

Pros / cons

Wider tire (+20 mm)

Section width

More dry grip and cornering bite
Sharper steering response on initial turn-in
Bigger contact patch under braking
More road noise on coarse asphalt
Worse aquaplaning resistance in standing water
Higher rolling resistance, small MPG hit
Possible fender or strut contact at full lock

Lower profile (-15% aspect)

Sidewall

Sharper turn-in and less sidewall roll
More planted on smooth tarmac
Bigger brake / caliper visual real estate
Harsher ride over expansion joints and potholes
Higher wheel-damage risk on impacts
Less curb protection for the rim lip
More sensitive to correct tire pressure

Taller overall (+22.7 mm)

Rolling diameter

Higher ground clearance and approach angle
Longer effective gearing — calmer highway revs
Bigger contact patch lengthwise
Speedometer reads low by ~3.0%
Reduced fender, strut and bumpstop clearance
Slower 0-60, more downshifts under load

+3″ rim upsize

Wheel diameter

OEM+ look, fills the arch better
Sharper response with matching low-profile rubber
Bigger brake clearance for upgrades
Heavier wheel, more unsprung mass
Harsher ride, more wheel-damage risk
Tire and wheel cost both go up

How it changes driving feel

Seat-of-the-pants

Steering response

Sharper turn-in

Ride comfort

Harsher impacts

Road noise

Louder on coarse asphalt

Wet / aquaplaning

Reduced standing-water margin

Fuel economy

Small MPG penalty likely

Curb / pothole protection

Higher wheel-damage risk

Fitment risk check

Verify before install

Fender rubbing

Width jump >20 mm — verify fender lip and inner liner clearance at full lock.

Suspension clearance

Wider tire may contact strut or control arm on full compression.

Speedometer drift

~3.0% — borderline; recalibration recommended.

Cluster preview

Borderline

Speedometer impact

At a true 100 km/h, your dashboard will read 103.0 km/h after switching to 265/50 R20 — a +3.03% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by +11.4 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

245/65 R17

Back to

265/50 R20