Which tire is taller, 245/65 R17 or 295/40 R20?

245/65 R17 is taller by 6.3 mm (0.84%) compared with 295/40 R20.

What is the diameter difference between 245/65 R17 and 295/40 R20?

245/65 R17 measures 750 mm overall diameter, 295/40 R20 measures 744 mm — a difference of 6.3 mm (0.84%).

How much speedometer error does this change create?

Switching from 245/65 R17 to 295/40 R20 changes the speedometer reading by -0.84%. At an indicated 100 km/h, your true speed becomes about 99.2 km/h.

Is 295/40 R20 a safe replacement for 245/65 R17?

Within ±3% diameter — generally considered a safe replacement from a speedometer-error standpoint, provided wheel offset, rim width and clearance also match your vehicle.

What else should I check before changing tire size?

Beyond diameter and speedometer error, verify wheel offset (ET), rim width, hub bore, load index, brake and suspension clearance, and your vehicle's manufacturer specification. Local regulations may also limit how far you can deviate from OEM.

Fitment comparison

245/65 R17versus295/40 R20

Δ Ø -6.3 mmSpeedo -0.84%OEM-safe

295/40 R20 is shorter than 245/65 R17 — quicker gearing feel, tighter arch gap, livelier throttle response.

Going from 245/65 R17 to 295/40 R20 steps up to a 20-inch rim while trimming sidewall to stay near OEM rolling diameter. This sizing approach barely shifts the rolling circumference. The speedometer offset is mild and well inside what most cars can tolerate without recalibration. The shorter sidewall gives the tire a firmer, more responsive feel and sharpens steering input. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.

TakeA solid pick for drivers chasing a more aggressive stance without abandoning OEM rolling diameter.

Quick fitment verdict

245/65 R17 → 295/40 R20 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Likely rubs

Significantly wider/taller — rubbing risk on liners or fender lip is real.

Speedometer Impact

-0.84%

At a true 100 km/h the dash reads 99.2 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

245/65 R17

Diameter: 750.3 mm
Sidewall: 159.3 mm
Wheel: 17″
Width: 245 mm

Δ delta

Ø -6.3 mm

SW -41.3 mm

RH -3.1 mm

NewNew

295/40 R20

Diameter: 744.0 mm
Sidewall: 118.0 mm
Wheel: 20″
Width: 295 mm

Real-world effects

How this swap actually feels

Steering response
100/100 · Sharper turn-in
Ride comfort
13/100 · Firmer ride
Fuel economy
8/100 · Slightly higher drag
Highway cruising
56/100 · Higher cruise revs
Pothole resistance
4/100 · Less wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lower stance

-3.1 mm

Chassis drops — tighter arch gap, more aggressive stance.

New tire drops ride height by ~3.1 mm — tighter arch gap, lower stance.

Suspension travel · arch clearance

Wheel gap

Wheel sits closer to the fender

-3.1 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

245/65 R17

295/40 R20

Wheel-gap Δ-3.1 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 99.2 km/h

-0.84%

Shorter rubber: dashboard reads conservatively low — you're slower than it claims.

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 245/65 R17 → 295/40 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

-41.3 mm sidewall

Sharper steering response

Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.

Ride firmness

65% → 40%

Slightly firmer over rough pavement

Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.

Fender relationship

+50 mm width

Wheel sits closer to the fender

Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.

Speedometer behavior

-0.84%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø -6.3 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 295/40 R20 OEM-safe?

Yes. Overall diameter changes by -0.84% versus 245/65 R17. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 295/40 R20 rub?

Possibly. Width changes by +50 mm and diameter by -6.3 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.

Direct answer

Does the speedometer change?

Yes — by -0.84%. Swapping 245/65 R17 for 295/40 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 99.2 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — firmer ride. Sidewall changes by -41.3 mm (65% → 40%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.

Current Tire

245/65R17

Width

Ratio

Rim

New Tire

295/40R20

Width

Ratio

Rim

Fitment · Scaled comparison

● Excellent fit

245/65 R17

Diameter

-6.3 mm

-0.84%

Sidewall

-41.3 mm

Speedometer

99.2 km/h

at true 100

Clearance

Excellent fit

295/40 R20

Ground line · Scaled comparison

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

-6.3 mm

-0.84%

Speedometer at 100

99.2 km/h

-0.84% error

Ground clearance

-3.1 mm

ride height delta

Sidewall change

-41.3 mm

revs/km: 427.8

Open visual comparisonCompare visually

Permalink for this comparison:

/compare/245-65-r17-vs-295-40-r20

Detailed comparison

Metric	245/65 R17	295/40 R20	Difference
Overall diameter	750.3 mm	744.0 mm	-6.3 mm (-0.84%)
Sidewall height	159.3 mm	118.0 mm	-41.3 mm
Circumference	2.357 m	2.337 m	-19.8 mm
Revs / km	424.2	427.8	+3.6
Ground clearance	reference	-3.1 mm	-3.1 mm
Speedometer @ 100 km/h	100.0 km/h	99.2 km/h	-0.84 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

245/65 R17

Profile: 65%
Circumference: 2.357 m

New

295/40 R20

Profile: 40%
Circumference: 2.337 m

Side-by-side fitment

Geometry

Current

245/65 R17

Section width: 245 mm
Aspect ratio: 65%
Sidewall: 159.3 mm
Wheel diameter: 17″(432 mm)
Overall diameter: 750.3 mm(29.54″)
Circumference: 2.357 m
Revs / km: 424.2

New

295/40 R20

Section width: 295 mm
Aspect ratio: 40%
Sidewall: 118.0 mm
Wheel diameter: 20″(508 mm)
Overall diameter: 744.0 mm(29.29″)
Circumference: 2.337 m
Revs / km: 427.8

Real-world consequences

Pros / cons

Wider tire (+50 mm)

Section width

More dry grip and cornering bite
Sharper steering response on initial turn-in
Bigger contact patch under braking
More road noise on coarse asphalt
Worse aquaplaning resistance in standing water
Higher rolling resistance, small MPG hit
Possible fender or strut contact at full lock

Lower profile (-25% aspect)

Sidewall

Sharper turn-in and less sidewall roll
More planted on smooth tarmac
Bigger brake / caliper visual real estate
Harsher ride over expansion joints and potholes
Higher wheel-damage risk on impacts
Less curb protection for the rim lip
More sensitive to correct tire pressure

+3″ rim upsize

Wheel diameter

OEM+ look, fills the arch better
Sharper response with matching low-profile rubber
Bigger brake clearance for upgrades
Heavier wheel, more unsprung mass
Harsher ride, more wheel-damage risk
Tire and wheel cost both go up

How it changes driving feel

Seat-of-the-pants

Steering response

Sharper turn-in

Ride comfort

Harsher impacts

Road noise

Louder on coarse asphalt

Wet / aquaplaning

Reduced standing-water margin

Fuel economy

Small MPG penalty likely

Curb / pothole protection

Higher wheel-damage risk

Fitment risk check

Verify before install

Fender rubbing

Width jump >20 mm — verify fender lip and inner liner clearance at full lock.

Suspension clearance

Wider tire may contact strut or control arm on full compression.

Cluster preview

Within tolerance

Speedometer impact

At a true 100 km/h, your dashboard will read 99.2 km/h after switching to 295/40 R20 — a -0.84% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by -3.1 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

245/65 R17

Back to

295/40 R20