Which tire is taller, 255/50 R20 or 245/70 R16?

255/50 R20 is taller by 13.6 mm (1.78%) compared with 245/70 R16.

What is the diameter difference between 255/50 R20 and 245/70 R16?

255/50 R20 measures 763 mm overall diameter, 245/70 R16 measures 749 mm — a difference of 13.6 mm (1.78%).

How much speedometer error does this change create?

Switching from 255/50 R20 to 245/70 R16 changes the speedometer reading by -1.78%. At an indicated 100 km/h, your true speed becomes about 98.2 km/h.

Is 245/70 R16 a safe replacement for 255/50 R20?

Within ±3% diameter — generally considered a safe replacement from a speedometer-error standpoint, provided wheel offset, rim width and clearance also match your vehicle.

What else should I check before changing tire size?

Beyond diameter and speedometer error, verify wheel offset (ET), rim width, hub bore, load index, brake and suspension clearance, and your vehicle's manufacturer specification. Local regulations may also limit how far you can deviate from OEM.

Fitment comparison

255/50 R20versus245/70 R16

Δ Ø -13.6 mmSpeedo -1.78%OEM-safe

245/70 R16 is shorter than 255/50 R20 — quicker gearing feel, tighter arch gap, livelier throttle response.

245/70 R16 drops the rim from 20 to 16 inches versus 255/50 R20, trading wheel size for taller sidewall. This tire combination trims or stretches rolling diameter by a small margin. Extra sidewall absorbs impacts more readily — a sensible bias for daily commuting and broken pavement.

The speedometer offset is small but measurable; worth keeping in mind if you watch the dash closely. Overall the swap sits inside the safe ±3% diameter window, so ABS, traction control and gearing behave normally.

TakePractical direction for winter wheels, chains, or rougher pavement where cushioning matters.

Quick fitment verdict

255/50 R20 → 245/70 R16 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Clears fender

Width and diameter stay close to stock — arch clearance unchanged.

Speedometer Impact

-1.78%

At a true 100 km/h the dash reads 98.2 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

255/50 R20

Diameter: 763.0 mm
Sidewall: 127.5 mm
Wheel: 20″
Width: 255 mm

Δ delta

Ø -13.6 mm

SW +44.0 mm

RH -6.8 mm

NewNew

245/70 R16

Diameter: 749.4 mm
Sidewall: 171.5 mm
Wheel: 16″
Width: 245 mm

Real-world effects

How this swap actually feels

Steering response
4/100 · Softer turn-in
Ride comfort
100/100 · More cushion
Fuel economy
54/100 · Slightly lower drag
Highway cruising
52/100 · Higher cruise revs
Pothole resistance
100/100 · More wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lower stance

-6.8 mm

Chassis drops — tighter arch gap, more aggressive stance.

New tire drops ride height by ~6.8 mm — tighter arch gap, lower stance.

Suspension travel · arch clearance

Wheel gap

Wheel sits closer to the fender

-6.8 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

255/50 R20

245/70 R16

Wheel-gap Δ-6.8 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 98.2 km/h

-1.78%

Shorter rubber: dashboard reads conservatively low — you're slower than it claims.

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 255/50 R20 → 245/70 R16 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

+44.0 mm sidewall

Softer, more relaxed turn-in

Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.

Ride firmness

50% → 70%

Softer over potholes and joints

Bumps and expansion joints are absorbed better — a comfort win for daily driving.

Fender relationship

-10 mm width

Fender gap reads near-identical

Width delta is too small to change stance — same visual signature as OEM.

Speedometer behavior

-1.78%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø -13.6 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 245/70 R16 OEM-safe?

Yes. Overall diameter changes by -1.78% versus 255/50 R20. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 245/70 R16 rub?

Borderline. Width changes by -10 mm and diameter by -13.6 mm. Borderline — check fender lip and inner strut clearance under load.

Direct answer

Does the speedometer change?

Yes — by -1.78%. Swapping 255/50 R20 for 245/70 R16 changes overall diameter, so at an indicated 100 km/h your true speed becomes 98.2 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — softer ride. Sidewall changes by +44.0 mm (50% → 70%). Ride softens and absorbs bumps better, with slightly less precise turn-in.

Current Tire

255/50R20

Width

Ratio

Rim

New Tire

245/70R16

Width

Ratio

Rim

Fitment · Scaled comparison

● Excellent fit

255/50 R20

Diameter

-13.6 mm

-1.78%

Sidewall

+44.0 mm

Speedometer

98.2 km/h

at true 100

Clearance

Excellent fit

245/70 R16

Ground line · Scaled comparison

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

-13.6 mm

-1.78%

Speedometer at 100

98.2 km/h

-1.78% error

Ground clearance

-6.8 mm

ride height delta

Sidewall change

+44.0 mm

revs/km: 424.8

Open visual comparisonCompare visually

Permalink for this comparison:

/compare/255-50-r20-vs-245-70-r16

Detailed comparison

Metric	255/50 R20	245/70 R16	Difference
Overall diameter	763.0 mm	749.4 mm	-13.6 mm (-1.78%)
Sidewall height	127.5 mm	171.5 mm	+44.0 mm
Circumference	2.397 m	2.354 m	-42.7 mm
Revs / km	417.2	424.8	+7.6
Ground clearance	reference	-6.8 mm	-6.8 mm
Speedometer @ 100 km/h	100.0 km/h	98.2 km/h	-1.78 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

255/50 R20

Profile: 50%
Circumference: 2.397 m

New

245/70 R16

Profile: 70%
Circumference: 2.354 m

Side-by-side fitment

Geometry

Current

255/50 R20

Section width: 255 mm
Aspect ratio: 50%
Sidewall: 127.5 mm
Wheel diameter: 20″(508 mm)
Overall diameter: 763.0 mm(30.04″)
Circumference: 2.397 m
Revs / km: 417.2

New

245/70 R16

Section width: 245 mm
Aspect ratio: 70%
Sidewall: 171.5 mm
Wheel diameter: 16″(406 mm)
Overall diameter: 749.4 mm(29.50″)
Circumference: 2.354 m
Revs / km: 424.8

Real-world consequences

Pros / cons

Narrower tire (-10 mm)

Section width

Better aquaplaning resistance
Lower rolling resistance and slightly better MPG
Quieter ride, less tramlining
Lighter unsprung mass on the corner
Less dry grip at the limit
Smaller contact patch under hard braking
Stance can look tucked or undersized

Taller sidewall (+20% aspect)

Sidewall

Plusher ride, better pothole and curb protection
More forgiving on bad roads and trails
Lower wheel-damage risk on impacts
More sidewall flex, softer steering feel
Slightly delayed turn-in response

Shorter overall (-13.6 mm)

Rolling diameter

Shorter effective gearing — perkier acceleration
Lower center of gravity, sharper transitions
More fender and arch clearance
Speedometer reads high by ~1.8%
Engine spins higher at cruise, small MPG hit
ABS / ESP recalibration may be advisable

-4″ rim downsize

Wheel diameter

Cheaper winter / track tire sizing
Lighter overall package, less unsprung mass
More sidewall = more impact absorption
Less aggressive stance
Possible brake caliper clearance issue going too small

How it changes driving feel

Seat-of-the-pants

Steering response

Softer, slower

Ride comfort

Plusher ride

Road noise

Similar cabin noise

Wet / aquaplaning

Comparable wet behavior

Fuel economy

Negligible change

Curb / pothole protection

More sidewall, more cushion

Cluster preview

Within tolerance

Speedometer impact

At a true 100 km/h, your dashboard will read 98.2 km/h after switching to 245/70 R16 — a -1.78% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by -6.8 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

255/50 R20

Back to

245/70 R16