Which tire is taller, 295/40 R20 or 315/30 R22?

315/30 R22 is taller by 3.8 mm (0.51%) compared with 295/40 R20.

What is the diameter difference between 295/40 R20 and 315/30 R22?

295/40 R20 measures 744 mm overall diameter, 315/30 R22 measures 748 mm — a difference of 3.8 mm (0.51%).

How much speedometer error does this change create?

Switching from 295/40 R20 to 315/30 R22 changes the speedometer reading by +0.51%. At an indicated 100 km/h, your true speed becomes about 100.5 km/h.

Is 315/30 R22 a safe replacement for 295/40 R20?

Within ±3% diameter — generally considered a safe replacement from a speedometer-error standpoint, provided wheel offset, rim width and clearance also match your vehicle.

What else should I check before changing tire size?

Beyond diameter and speedometer error, verify wheel offset (ET), rim width, hub bore, load index, brake and suspension clearance, and your vehicle's manufacturer specification. Local regulations may also limit how far you can deviate from OEM.

Fitment comparison

295/40 R20versus315/30 R22

Δ Ø +3.8 mmSpeedo +0.51%OEM-safe

315/30 R22 stands taller than 295/40 R20 — bigger rolling diameter, slightly more clearance, calmer cruise revs.

Plus-sizing from 295/40 R20 to 315/30 R22 keeps overall diameter close to factory while opening room for a larger 22-inch wheel. This wheel and tire pairing lands within OEM rolling-diameter tolerance. Dashboard speed shifts only marginally — within the noise of normal OEM tolerance. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.

TakeCommon upgrade for sportier handling and a tighter wheel-gap look on the same vehicle.

Quick fitment verdict

295/40 R20 → 315/30 R22 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Check at lock

Wider or taller setup — verify clearance at full steering lock and over bumps.

Speedometer Impact

+0.51%

At a true 100 km/h the dash reads 100.5 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

295/40 R20

Diameter: 744.0 mm
Sidewall: 118.0 mm
Wheel: 20″
Width: 295 mm

Δ delta

Ø +3.8 mm

SW -23.5 mm

RH +1.9 mm

NewNew

315/30 R22

Diameter: 747.8 mm
Sidewall: 94.5 mm
Wheel: 22″
Width: 315 mm

Real-world effects

How this swap actually feels

Steering response
96/100 · Sharper turn-in
Ride comfort
24/100 · Firmer ride
Fuel economy
45/100 · Slightly higher drag
Highway cruising
62/100 · Lower cruise revs
Pothole resistance
15/100 · Less wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lifted stance

+1.9 mm

Chassis sits higher — slightly more clearance, wheel-gap visually grows.

New tire lifts the chassis by ~1.9 mm — more clearance, slightly more wheel-gap.

Suspension travel · arch clearance

Wheel gap

Wheel gap stays virtually unchanged

+1.9 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

295/40 R20

315/30 R22

Wheel-gap Δ+1.9 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 100.5 km/h

+0.51%

Taller rubber: at a true 100 km/h your dashboard reads optimistically high.

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 295/40 R20 → 315/30 R22 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

-23.5 mm sidewall

Sharper steering response

Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.

Ride firmness

40% → 30%

Slightly firmer over rough pavement

Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.

Fender relationship

+20 mm width

Wheel sits closer to the fender

Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.

Speedometer behavior

+0.51%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø +3.8 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 315/30 R22 OEM-safe?

Yes. Overall diameter changes by +0.51% versus 295/40 R20. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 315/30 R22 rub?

Borderline. Width changes by +20 mm and diameter by +3.8 mm. Borderline — check fender lip and inner strut clearance under load.

Direct answer

Does the speedometer change?

Yes — by +0.51%. Swapping 295/40 R20 for 315/30 R22 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.5 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Yes — firmer ride. Sidewall changes by -23.5 mm (40% → 30%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.

Current Tire

295/40R20

Width

Ratio

Rim

New Tire

315/30R22

Width

Ratio

Rim

Fitment · Scaled comparison

● Excellent fit

295/40 R20

Diameter

+3.8 mm

+0.51%

Sidewall

-23.5 mm

Speedometer

100.5 km/h

at true 100

Clearance

Excellent fit

315/30 R22

Ground line · Scaled comparison

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

+3.8 mm

0.51%

Speedometer at 100

100.5 km/h

+0.51% error

Ground clearance

+1.9 mm

ride height delta

Sidewall change

-23.5 mm

revs/km: 425.7

Open visual comparisonCompare visually

Permalink for this comparison:

/compare/295-40-r20-vs-315-30-r22

Detailed comparison

Metric	295/40 R20	315/30 R22	Difference
Overall diameter	744.0 mm	747.8 mm	+3.8 mm (+0.51%)
Sidewall height	118.0 mm	94.5 mm	-23.5 mm
Circumference	2.337 m	2.349 m	+11.9 mm
Revs / km	427.8	425.7	-2.2
Ground clearance	reference	+1.9 mm	+1.9 mm
Speedometer @ 100 km/h	100.0 km/h	100.5 km/h	+0.51 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

295/40 R20

Profile: 40%
Circumference: 2.337 m

New

315/30 R22

Profile: 30%
Circumference: 2.349 m

Side-by-side fitment

Geometry

Current

295/40 R20

Section width: 295 mm
Aspect ratio: 40%
Sidewall: 118.0 mm
Wheel diameter: 20″(508 mm)
Overall diameter: 744.0 mm(29.29″)
Circumference: 2.337 m
Revs / km: 427.8

New

315/30 R22

Section width: 315 mm
Aspect ratio: 30%
Sidewall: 94.5 mm
Wheel diameter: 22″(559 mm)
Overall diameter: 747.8 mm(29.44″)
Circumference: 2.349 m
Revs / km: 425.7

Real-world consequences

Pros / cons

Wider tire (+20 mm)

Section width

More dry grip and cornering bite
Sharper steering response on initial turn-in
Bigger contact patch under braking
More road noise on coarse asphalt
Worse aquaplaning resistance in standing water
Higher rolling resistance, small MPG hit
Possible fender or strut contact at full lock

Lower profile (-10% aspect)

Sidewall

Sharper turn-in and less sidewall roll
More planted on smooth tarmac
Bigger brake / caliper visual real estate
Harsher ride over expansion joints and potholes
Higher wheel-damage risk on impacts
Less curb protection for the rim lip
More sensitive to correct tire pressure

+2″ rim upsize

Wheel diameter

OEM+ look, fills the arch better
Sharper response with matching low-profile rubber
Bigger brake clearance for upgrades
Heavier wheel, more unsprung mass
Harsher ride, more wheel-damage risk
Tire and wheel cost both go up

How it changes driving feel

Seat-of-the-pants

Steering response

Sharper turn-in

Ride comfort

Harsher impacts

Road noise

Louder on coarse asphalt

Wet / aquaplaning

Reduced standing-water margin

Fuel economy

Small MPG penalty likely

Curb / pothole protection

Higher wheel-damage risk

Fitment risk check

Verify before install

Fender rubbing

Width jump >20 mm — verify fender lip and inner liner clearance at full lock.

Suspension clearance

Wider tire may contact strut or control arm on full compression.

Cluster preview

Within tolerance

Speedometer impact

At a true 100 km/h, your dashboard will read 100.5 km/h after switching to 315/30 R22 — a +0.51% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by +1.9 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

295/40 R20

Back to

315/30 R22