OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
315/30 R22versus295/40 R20
Δ Ø -3.8 mmSpeedo -0.51%OEM-safe
295/40 R20 is shorter than 315/30 R22 — quicker gearing feel, tighter arch gap, livelier throttle response.
Going from 315/30 R22 to 295/40 R20 is a minus-2 setup that adds sidewall on a smaller 20-inch wheel. This setup keeps overall diameter very close to stock. More sidewall typically improves comfort and curb protection, especially on city streets.
Speedometer drift stays small enough that most drivers won't notice it day to day. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakePractical direction for winter wheels, chains, or rougher pavement where cushioning matters.
Quick fitment verdict
315/30 R22 → 295/40 R20 at a glance
Fender Clearance
Clears fender
Width and diameter stay close to stock — arch clearance unchanged.
Speedometer Impact
-0.51%
At a true 100 km/h the dash reads 99.5 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
315/30 R22
- Diameter
- 747.8 mm
- Sidewall
- 94.5 mm
- Wheel
- 22″
- Width
- 315 mm
Δ delta
Ø -3.8 mm
SW +23.5 mm
RH -1.9 mm
NewNew
295/40 R20
- Diameter
- 744.0 mm
- Sidewall
- 118.0 mm
- Wheel
- 20″
- Width
- 295 mm
Real-world effects
How this swap actually feels
- Steering response15/100 · Softer turn-in
- Ride comfort100/100 · More cushion
- Fuel economy45/100 · Slightly lower drag
- Highway cruising58/100 · Higher cruise revs
- Pothole resistance100/100 · More wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lower stance
Chassis drops — tighter arch gap, more aggressive stance.
New tire drops ride height by ~1.9 mm — tighter arch gap, lower stance.
Suspension travel · arch clearance
Wheel gap
Wheel gap stays virtually unchanged
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
315/30 R22
295/40 R20
Wheel-gap Δ-1.9 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 99.5 km/h
Shorter rubber: dashboard reads conservatively low — you're slower than it claims.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 315/30 R22 → 295/40 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
+23.5 mm sidewallSofter, more relaxed turn-in
Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.
Ride firmness
30% → 40%Softer over potholes and joints
Bumps and expansion joints are absorbed better — a comfort win for daily driving.
Fender relationship
-20 mm widthMore tuck under the arch
Narrower contact patch tucks slightly inboard — cleaner look from the rear three-quarter.
Speedometer behavior
-0.51%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø -3.8 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 295/40 R20 OEM-safe?
Yes. Overall diameter changes by -0.51% versus 315/30 R22. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 295/40 R20 rub?
Borderline. Width changes by -20 mm and diameter by -3.8 mm. Borderline — check fender lip and inner strut clearance under load.
Direct answer
Does the speedometer change?
Yes — by -0.51%. Swapping 315/30 R22 for 295/40 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 99.5 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — softer ride. Sidewall changes by +23.5 mm (30% → 40%). Ride softens and absorbs bumps better, with slightly less precise turn-in.
Current Tire
315/30R22
New Tire
295/40R20
Fitment · Scaled comparison
● Excellent fit
315/30 R22
Diameter
-3.8 mm
-0.51%
Sidewall
+23.5 mm
Speedometer
99.5 km/h
at true 100
Clearance
Excellent fit
295/40 R20
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
-3.8 mm
-0.51%
Speedometer at 100
99.5 km/h
-0.51% error
Ground clearance
-1.9 mm
ride height delta
Sidewall change
+23.5 mm
revs/km: 427.8
Permalink for this comparison:
/compare/315-30-r22-vs-295-40-r20Detailed comparison
| Metric | 315/30 R22 | 295/40 R20 | Difference |
|---|---|---|---|
| Overall diameter | 747.8 mm | 744.0 mm | -3.8 mm (-0.51%) |
| Sidewall height | 94.5 mm | 118.0 mm | +23.5 mm |
| Circumference | 2.349 m | 2.337 m | -11.9 mm |
| Revs / km | 425.7 | 427.8 | +2.2 |
| Ground clearance | reference | -1.9 mm | -1.9 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 99.5 km/h | -0.51 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
315/30 R22- Profile
- 30%
- Circumference
- 2.349 m
New
295/40 R20- Profile
- 40%
- Circumference
- 2.337 m
Side-by-side fitment
GeometryCurrent
315/30 R22- Section width
- 315 mm
- Aspect ratio
- 30%
- Sidewall
- 94.5 mm
- Wheel diameter
- 22″(559 mm)
- Overall diameter
- 747.8 mm(29.44″)
- Circumference
- 2.349 m
- Revs / km
- 425.7
New
295/40 R20- Section width
- 295 mm
- Aspect ratio
- 40%
- Sidewall
- 118.0 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 744.0 mm(29.29″)
- Circumference
- 2.337 m
- Revs / km
- 427.8
Real-world consequences
Pros / consNarrower tire (-20 mm)
Section width- Better aquaplaning resistance
- Lower rolling resistance and slightly better MPG
- Quieter ride, less tramlining
- Lighter unsprung mass on the corner
- Less dry grip at the limit
- Smaller contact patch under hard braking
- Stance can look tucked or undersized
Taller sidewall (+10% aspect)
Sidewall- Plusher ride, better pothole and curb protection
- More forgiving on bad roads and trails
- Lower wheel-damage risk on impacts
- More sidewall flex, softer steering feel
- Slightly delayed turn-in response
-2″ rim downsize
Wheel diameter- Cheaper winter / track tire sizing
- Lighter overall package, less unsprung mass
- More sidewall = more impact absorption
- Less aggressive stance
- Possible brake caliper clearance issue going too small
How it changes driving feel
Seat-of-the-pantsSteering response
Softer, slower
Ride comfort
Plusher ride
Road noise
Similar cabin noise
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Negligible change
Curb / pothole protection
More sidewall, more cushion
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 99.5 km/h after switching to 295/40 R20 — a -0.51% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by -1.9 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
315/30 R22
Back to
295/40 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 315/30 R22 and 295/40 R20.
275/35 R22 vs 315/30 R22
Wider variation on the same rim — more grip, less clearance.
Δ 0.47%
265/35 R22 vs 315/30 R22
Wider variation on the same rim — more grip, less clearance.
Δ 0.47%
255/45 R20 vs 295/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.88%
285/35 R22 vs 315/30 R22
Wider variation on the same rim — more grip, less clearance.
Δ 1.38%
275/45 R20 vs 295/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.52%
295/30 R22 vs 315/30 R22
Wider variation on the same rim — more grip, less clearance.
Δ 1.63%
245/45 R20 vs 295/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.13%
275/40 R20 vs 295/40 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.20%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.