OEM Safe
Out of spec
Beyond OEM tolerance — speedometer and ABS need professional review.
Fitment comparison
225/35 R19versus245/35 R20
Δ Ø +39.4 mmSpeedo +6.16%Aggressive
245/35 R20 stands taller than 225/35 R19 — bigger rolling diameter, slightly more clearance, calmer cruise revs.
Going from 225/35 R19 to 245/35 R20 steps up to a 20-inch rim while trimming sidewall to stay near OEM rolling diameter. This tire combination swings rolling diameter far enough to feel on the road. Speedometer error is large enough that recalibration is effectively required for accurate readings. The wider section adds contact patch and lateral stability, while eating into fender and suspension clearance. A diameter change beyond 5% is aggressive enough to influence ABS, traction control and gearing; treat it as a serious modification.
TakeRecommended only after a professional fitment check and speedometer recalibration.
Quick fitment verdict
225/35 R19 → 245/35 R20 at a glance
Fender Clearance
Likely rubs
Significantly wider/taller — rubbing risk on liners or fender lip is real.
Speedometer Impact
+6.16%
Dash reads 106.2 km/h at a true 100 km/h — recalibrate.
Daily Driving
Aggressive
Geometry deviates enough to matter — confirm clearance before daily use.
Side-by-side telemetry
Dimensional read-out
Current
225/35 R19
- Diameter
- 640.1 mm
- Sidewall
- 78.8 mm
- Wheel
- 19″
- Width
- 225 mm
Δ delta
Ø +39.4 mm
SW +7.0 mm
RH +19.7 mm
NewNew
245/35 R20
- Diameter
- 679.5 mm
- Sidewall
- 85.8 mm
- Wheel
- 20″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response44/100 · Softer turn-in
- Ride comfort76/100 · More cushion
- Fuel economy34/100 · Slightly higher drag
- Highway cruising84/100 · Lower cruise revs
- Pothole resistance73/100 · More wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lifted stance
Chassis sits higher — slightly more clearance, wheel-gap visually grows.
New tire lifts the chassis by ~19.7 mm — more clearance, slightly more wheel-gap.
Suspension travel · arch clearance
Wheel gap
Wheel gap visually increases
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
225/35 R19
245/35 R20
Wheel-gap Δ+19.7 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 106.2 km/h
Taller rubber: at a true 100 km/h your dashboard reads optimistically high.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 225/35 R19 → 245/35 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
+7.0 mm sidewallSofter, more relaxed turn-in
Taller sidewall flexes a touch more before loading the contact patch — calmer, comfort-tuned.
Ride firmness
35% → 35%Softer over potholes and joints
Bumps and expansion joints are absorbed better — a comfort win for daily driving.
Fender relationship
+20 mm widthWheel sits closer to the fender
Wider tire pushes the contact patch outboard — flusher stance, but verify fender lip clearance at full lock.
Speedometer behavior
+6.16%Out of tolerance — recalibrate
Beyond ±5% — speedometer, gearing and ABS calibration all need a professional review.
Daily drivability
Ø +39.4 mmAggressive setup — verify before daily use
Geometry deviates enough to matter — check clearance, recalibrate the dash, then re-evaluate.
Direct answer
Is 245/35 R20 OEM-safe?
No. Overall diameter changes by +6.16% versus 225/35 R19. Not OEM-safe. Overall diameter strays beyond ±5% — recalibration and clearance review are required.
Direct answer
Will 245/35 R20 rub?
Possibly. Width changes by +20 mm and diameter by +39.4 mm. Possible rub at full lock or full suspension compression — verify fender lip and inner strut clearance before committing.
Direct answer
Does the speedometer change?
Yes — by +6.16%. Swapping 225/35 R19 for 245/35 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 106.2 km/h. That's outside safe tolerance — recalibrate.
Direct answer
Does lower sidewall affect comfort?
Yes — softer ride. Sidewall changes by +7.0 mm (35% → 35%). Ride softens and absorbs bumps better, with slightly less precise turn-in.
Current Tire
225/35R19
New Tire
245/35R20
Fitment · Scaled comparison
● Not recommended
225/35 R19
Diameter
+39.4 mm
+6.16%
Sidewall
+7.0 mm
Speedometer
106.2 km/h
at true 100
Clearance
Not recommended
245/35 R20
Ground line · Scaled comparison
Not Recommended
Over 5% — speedometer & ABS may misread
Diameter change
+39.4 mm
6.16%
Speedometer at 100
106.2 km/h
+6.16% error
Ground clearance
+19.7 mm
ride height delta
Sidewall change
+7.0 mm
revs/km: 468.4
Permalink for this comparison:
/compare/225-35-r19-vs-245-35-r20Detailed comparison
| Metric | 225/35 R19 | 245/35 R20 | Difference |
|---|---|---|---|
| Overall diameter | 640.1 mm | 679.5 mm | +39.4 mm (+6.16%) |
| Sidewall height | 78.8 mm | 85.8 mm | +7.0 mm |
| Circumference | 2.011 m | 2.135 m | +123.8 mm |
| Revs / km | 497.3 | 468.4 | -28.8 |
| Ground clearance | reference | +19.7 mm | +19.7 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 106.2 km/h | +6.16 km/h |
Verdict: danger
Over 5% diameter difference — likely to affect speedometer accuracy, ABS calibration and gearing. Not recommended without professional review.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
225/35 R19- Profile
- 35%
- Circumference
- 2.011 m
New
245/35 R20- Profile
- 35%
- Circumference
- 2.135 m
Side-by-side fitment
GeometryCurrent
225/35 R19- Section width
- 225 mm
- Aspect ratio
- 35%
- Sidewall
- 78.8 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 640.1 mm(25.20″)
- Circumference
- 2.011 m
- Revs / km
- 497.3
New
245/35 R20- Section width
- 245 mm
- Aspect ratio
- 35%
- Sidewall
- 85.8 mm
- Wheel diameter
- 20″(508 mm)
- Overall diameter
- 679.5 mm(26.75″)
- Circumference
- 2.135 m
- Revs / km
- 468.4
Real-world consequences
Pros / consWider tire (+20 mm)
Section width- More dry grip and cornering bite
- Sharper steering response on initial turn-in
- Bigger contact patch under braking
- More road noise on coarse asphalt
- Worse aquaplaning resistance in standing water
- Higher rolling resistance, small MPG hit
- Possible fender or strut contact at full lock
Taller overall (+39.4 mm)
Rolling diameter- Higher ground clearance and approach angle
- Longer effective gearing — calmer highway revs
- Bigger contact patch lengthwise
- Speedometer reads low by ~6.2%
- Reduced fender, strut and bumpstop clearance
- Slower 0-60, more downshifts under load
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Sharper turn-in
Ride comfort
Comparable
Road noise
Louder on coarse asphalt
Wet / aquaplaning
Reduced standing-water margin
Fuel economy
Small MPG penalty likely
Curb / pothole protection
About the same
Fitment risk check
Verify before installFender rubbing
Width jump >20 mm — verify fender lip and inner liner clearance at full lock.
Suspension clearance
Wider tire may contact strut or control arm on full compression.
Speedometer drift
~6.2% diameter delta — speedo and ABS calibration likely affected.
ABS / ESP calibration
Outside factory tolerance — recalibration may be required for safety systems.
Cluster preview
Excessive driftSpeedometer impact
At a true 100 km/h, your dashboard will read 106.2 km/h after switching to 245/35 R20 — a +6.16% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by +19.7 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
225/35 R19
Back to
245/35 R20
Drivers also compare
Closely-related fitments and plus-size swaps for 225/35 R19 and 245/35 R20.
245/35 R20 vs 285/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 0.07%
245/35 R20 vs 255/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.03%
225/35 R19 vs 235/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.09%
245/35 R20 vs 305/30 R20
Wider variation on the same rim — more grip, less clearance.
Δ 1.69%
245/35 R20 vs 265/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 2.06%
225/35 R19 vs 245/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 2.19%
245/35 R20 vs 275/35 R20
Wider variation on the same rim — more grip, less clearance.
Δ 3.09%
225/35 R19 vs 255/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 3.28%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.