OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
255/40 R17versus245/35 R18
Δ Ø -7.1 mmSpeedo -1.12%OEM-safe
245/35 R18 is shorter than 255/40 R17 — quicker gearing feel, tighter arch gap, livelier throttle response.
Going from 255/40 R17 to 245/35 R18 steps up to a 18-inch rim while trimming sidewall to stay near OEM rolling diameter. This sizing approach preserves rolling diameter within a hair of the original. The speedometer offset is mild and well inside what most cars can tolerate without recalibration. The shorter sidewall gives the tire a firmer, more responsive feel and sharpens steering input. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeA solid pick for drivers chasing a more aggressive stance without abandoning OEM rolling diameter.
Quick fitment verdict
255/40 R17 → 245/35 R18 at a glance
Fender Clearance
Clears fender
Width and diameter stay close to stock — arch clearance unchanged.
Speedometer Impact
-1.12%
At a true 100 km/h the dash reads 98.9 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
255/40 R17
- Diameter
- 635.8 mm
- Sidewall
- 102.0 mm
- Wheel
- 17″
- Width
- 255 mm
Δ delta
Ø -7.1 mm
SW -16.3 mm
RH -3.5 mm
NewNew
245/35 R18
- Diameter
- 628.7 mm
- Sidewall
- 85.8 mm
- Wheel
- 18″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response89/100 · Sharper turn-in
- Ride comfort31/100 · Firmer ride
- Fuel economy56/100 · Slightly lower drag
- Highway cruising56/100 · Higher cruise revs
- Pothole resistance23/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lower stance
Chassis drops — tighter arch gap, more aggressive stance.
New tire drops ride height by ~3.5 mm — tighter arch gap, lower stance.
Suspension travel · arch clearance
Wheel gap
Wheel sits closer to the fender
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
255/40 R17
245/35 R18
Wheel-gap Δ-3.5 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 98.9 km/h
Shorter rubber: dashboard reads conservatively low — you're slower than it claims.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 255/40 R17 → 245/35 R18 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-16.3 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
40% → 35%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
-10 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
-1.12%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø -7.1 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 245/35 R18 OEM-safe?
Yes. Overall diameter changes by -1.12% versus 255/40 R17. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 245/35 R18 rub?
Unlikely. Width changes by -10 mm and diameter by -7.1 mm. Very unlikely to rub with OEM wheel offset.
Direct answer
Does the speedometer change?
Yes — by -1.12%. Swapping 255/40 R17 for 245/35 R18 changes overall diameter, so at an indicated 100 km/h your true speed becomes 98.9 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -16.3 mm (40% → 35%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
255/40R17
New Tire
245/35R18
Fitment · Scaled comparison
● Excellent fit
255/40 R17
Diameter
-7.1 mm
-1.12%
Sidewall
-16.3 mm
Speedometer
98.9 km/h
at true 100
Clearance
Excellent fit
245/35 R18
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
-7.1 mm
-1.12%
Speedometer at 100
98.9 km/h
-1.12% error
Ground clearance
-3.5 mm
ride height delta
Sidewall change
-16.3 mm
revs/km: 506.3
Permalink for this comparison:
/compare/255-40-r17-vs-245-35-r18Detailed comparison
| Metric | 255/40 R17 | 245/35 R18 | Difference |
|---|---|---|---|
| Overall diameter | 635.8 mm | 628.7 mm | -7.1 mm (-1.12%) |
| Sidewall height | 102.0 mm | 85.8 mm | -16.3 mm |
| Circumference | 1.997 m | 1.975 m | -22.3 mm |
| Revs / km | 500.6 | 506.3 | +5.7 |
| Ground clearance | reference | -3.5 mm | -3.5 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 98.9 km/h | -1.12 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
255/40 R17- Profile
- 40%
- Circumference
- 1.997 m
New
245/35 R18- Profile
- 35%
- Circumference
- 1.975 m
Side-by-side fitment
GeometryCurrent
255/40 R17- Section width
- 255 mm
- Aspect ratio
- 40%
- Sidewall
- 102.0 mm
- Wheel diameter
- 17″(432 mm)
- Overall diameter
- 635.8 mm(25.03″)
- Circumference
- 1.997 m
- Revs / km
- 500.6
New
245/35 R18- Section width
- 245 mm
- Aspect ratio
- 35%
- Sidewall
- 85.8 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 628.7 mm(24.75″)
- Circumference
- 1.975 m
- Revs / km
- 506.3
Real-world consequences
Pros / consNarrower tire (-10 mm)
Section width- Better aquaplaning resistance
- Lower rolling resistance and slightly better MPG
- Quieter ride, less tramlining
- Lighter unsprung mass on the corner
- Less dry grip at the limit
- Smaller contact patch under hard braking
- Stance can look tucked or undersized
Lower profile (-5% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Similar feel
Ride comfort
Comparable
Road noise
Similar cabin noise
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Negligible change
Curb / pothole protection
Higher wheel-damage risk
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 98.9 km/h after switching to 245/35 R18 — a -1.12% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by -3.5 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
255/40 R17
Back to
245/35 R18
Drivers also compare
Closely-related fitments and plus-size swaps for 255/40 R17 and 245/35 R18.
215/40 R18 vs 245/35 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.08%
205/50 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 0.16%
225/45 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 0.24%
245/35 R18 vs 255/35 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.11%
235/45 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.17%
245/40 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.27%
225/40 R18 vs 245/35 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.33%
215/45 R17 vs 255/40 R17
Wider variation on the same rim — more grip, less clearance.
Δ 1.68%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.