OEM Safe
Within ±3%
Inside factory tolerance — ABS, ESP and cruise control stay calibrated.
Fitment comparison
255/40 R18versus245/35 R19
Δ Ø -7.1 mmSpeedo -1.07%OEM-safe
245/35 R19 is shorter than 255/40 R18 — quicker gearing feel, tighter arch gap, livelier throttle response.
Plus-sizing from 255/40 R18 to 245/35 R19 keeps overall diameter close to factory while opening room for a larger 19-inch wheel. This sizing approach barely shifts the rolling circumference.
Dashboard speed shifts only marginally — within the noise of normal OEM tolerance. Expect a more planted steering feel, at the cost of some of the cushioning a taller sidewall provides. The narrower section trims rolling resistance and tends to cut through snow more effectively. The larger wheel shows more of the brake hardware and tightens up the wheel-gap look. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.
TakeA solid pick for drivers chasing a more aggressive stance without abandoning OEM rolling diameter.
Quick fitment verdict
255/40 R18 → 245/35 R19 at a glance
Fender Clearance
Clears fender
Width and diameter stay close to stock — arch clearance unchanged.
Speedometer Impact
-1.07%
At a true 100 km/h the dash reads 98.9 km/h — negligible.
Daily Driving
Livable
Daily use is fine; expect a slightly different ride and cruise rev count.
Side-by-side telemetry
Dimensional read-out
Current
255/40 R18
- Diameter
- 661.2 mm
- Sidewall
- 102.0 mm
- Wheel
- 18″
- Width
- 255 mm
Δ delta
Ø -7.1 mm
SW -16.3 mm
RH -3.6 mm
NewNew
245/35 R19
- Diameter
- 654.1 mm
- Sidewall
- 85.8 mm
- Wheel
- 19″
- Width
- 245 mm
Real-world effects
How this swap actually feels
- Steering response89/100 · Sharper turn-in
- Ride comfort31/100 · Firmer ride
- Fuel economy56/100 · Slightly lower drag
- Highway cruising56/100 · Higher cruise revs
- Pothole resistance23/100 · Less wheel protection
Shareable card
Generate fitment card
Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.
Ride height
Lower stance
Chassis drops — tighter arch gap, more aggressive stance.
New tire drops ride height by ~3.6 mm — tighter arch gap, lower stance.
Suspension travel · arch clearance
Wheel gap
Wheel sits closer to the fender
How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.
255/40 R18
245/35 R19
Wheel-gap Δ-3.6 mm
Static · unloaded chassis
Fender relationship
Tucked · Flush · Poke
The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.
Tucked
Inside fender
Flush
Lip-aligned
Poke
Outside fender
Width & offset dependent
Speedometer reality
Dash reads 98.9 km/h
Shorter rubber: dashboard reads conservatively low — you're slower than it claims.
ABS · ESP · cruise control
Setup telemetry
How this setup changes the car
Driver-perspective read-out of the 255/40 R18 → 245/35 R19 swap — steering, comfort, stance and dash behavior in plain enthusiast language.
Steering feel
-16.3 mm sidewallSharper steering response
Shorter sidewall transmits inputs faster — quicker turn-in, more confident on-center feel.
Ride firmness
40% → 35%Slightly firmer over rough pavement
Expect more chatter on broken tarmac and a sharper pothole strike — keep an eye on wheel damage risk.
Fender relationship
-10 mm widthFender gap reads near-identical
Width delta is too small to change stance — same visual signature as OEM.
Speedometer behavior
-1.07%OEM-safe speedometer reading
Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.
Daily drivability
Ø -7.1 mmLivable upgrade with minor trade-offs
Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.
Direct answer
Is 245/35 R19 OEM-safe?
Yes. Overall diameter changes by -1.07% versus 255/40 R18. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.
Direct answer
Will 245/35 R19 rub?
Unlikely. Width changes by -10 mm and diameter by -7.1 mm. Very unlikely to rub with OEM wheel offset.
Direct answer
Does the speedometer change?
Yes — by -1.07%. Swapping 255/40 R18 for 245/35 R19 changes overall diameter, so at an indicated 100 km/h your true speed becomes 98.9 km/h. That's within the ±3% OEM tolerance — no recalibration needed.
Direct answer
Does lower sidewall affect comfort?
Yes — firmer ride. Sidewall changes by -16.3 mm (40% → 35%). Ride becomes firmer and steering sharper, but potholes and expansion joints hit harder and wheel damage risk rises.
Current Tire
255/40R18
New Tire
245/35R19
Fitment · Scaled comparison
● Excellent fit
255/40 R18
Diameter
-7.1 mm
-1.07%
Sidewall
-16.3 mm
Speedometer
98.9 km/h
at true 100
Clearance
Excellent fit
245/35 R19
Ground line · Scaled comparison
Excellent Fit
Within ±3% — safe for daily driving
Diameter change
-7.1 mm
-1.07%
Speedometer at 100
98.9 km/h
-1.07% error
Ground clearance
-3.6 mm
ride height delta
Sidewall change
-16.3 mm
revs/km: 486.6
Permalink for this comparison:
/compare/255-40-r18-vs-245-35-r19Detailed comparison
| Metric | 255/40 R18 | 245/35 R19 | Difference |
|---|---|---|---|
| Overall diameter | 661.2 mm | 654.1 mm | -7.1 mm (-1.07%) |
| Sidewall height | 102.0 mm | 85.8 mm | -16.3 mm |
| Circumference | 2.077 m | 2.055 m | -22.3 mm |
| Revs / km | 481.4 | 486.6 | +5.2 |
| Ground clearance | reference | -3.6 mm | -3.6 mm |
| Speedometer @ 100 km/h | 100.0 km/h | 98.9 km/h | -1.07 km/h |
Verdict: excellent
Within ±3% — speedometer, ABS and traction control should behave normally.
Dimensional comparison
Side-by-sideScaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.
Current
255/40 R18- Profile
- 40%
- Circumference
- 2.077 m
New
245/35 R19- Profile
- 35%
- Circumference
- 2.055 m
Side-by-side fitment
GeometryCurrent
255/40 R18- Section width
- 255 mm
- Aspect ratio
- 40%
- Sidewall
- 102.0 mm
- Wheel diameter
- 18″(457 mm)
- Overall diameter
- 661.2 mm(26.03″)
- Circumference
- 2.077 m
- Revs / km
- 481.4
New
245/35 R19- Section width
- 245 mm
- Aspect ratio
- 35%
- Sidewall
- 85.8 mm
- Wheel diameter
- 19″(483 mm)
- Overall diameter
- 654.1 mm(25.75″)
- Circumference
- 2.055 m
- Revs / km
- 486.6
Real-world consequences
Pros / consNarrower tire (-10 mm)
Section width- Better aquaplaning resistance
- Lower rolling resistance and slightly better MPG
- Quieter ride, less tramlining
- Lighter unsprung mass on the corner
- Less dry grip at the limit
- Smaller contact patch under hard braking
- Stance can look tucked or undersized
Lower profile (-5% aspect)
Sidewall- Sharper turn-in and less sidewall roll
- More planted on smooth tarmac
- Bigger brake / caliper visual real estate
- Harsher ride over expansion joints and potholes
- Higher wheel-damage risk on impacts
- Less curb protection for the rim lip
- More sensitive to correct tire pressure
+1″ rim upsize
Wheel diameter- OEM+ look, fills the arch better
- Sharper response with matching low-profile rubber
- Bigger brake clearance for upgrades
- Heavier wheel, more unsprung mass
- Harsher ride, more wheel-damage risk
- Tire and wheel cost both go up
How it changes driving feel
Seat-of-the-pantsSteering response
Similar feel
Ride comfort
Comparable
Road noise
Similar cabin noise
Wet / aquaplaning
Comparable wet behavior
Fuel economy
Negligible change
Curb / pothole protection
Higher wheel-damage risk
Cluster preview
Within toleranceSpeedometer impact
At a true 100 km/h, your dashboard will read 98.9 km/h after switching to 245/35 R19 — a -1.07% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.
Ground clearance change
The new tire's half-diameter changes ride height by -3.6 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.
Back to
255/40 R18
Back to
245/35 R19
Drivers also compare
Closely-related fitments and plus-size swaps for 255/40 R18 and 245/35 R19.
225/45 R18 vs 255/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 0.23%
245/35 R19 vs 255/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.07%
235/35 R19 vs 245/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.08%
235/45 R18 vs 255/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.12%
255/40 R18 vs 265/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.21%
245/40 R18 vs 255/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.22%
225/40 R19 vs 245/35 R19
Wider variation on the same rim — more grip, less clearance.
Δ 1.28%
215/45 R18 vs 255/40 R18
Wider variation on the same rim — more grip, less clearance.
Δ 1.61%
Related topics
Comparison hub
Back to the tire size comparison calculator
Browse every wheel and tire fitment comparison, by rim size or popularity.