Fitment comparison

285/30 R20versus245/35 R20

Δ Ø +0.5 mmSpeedo +0.07%OEM-safe

245/35 R20 stands taller than 285/30 R20 — bigger rolling diameter, slightly more clearance, calmer cruise revs.

Going from 285/30 R20 to 245/35 R20 keeps the same wheel but slims the tire by 40 mm. This wheel and tire pairing keeps overall diameter very close to stock. The taller sidewall adds cushioning over potholes and rougher roads, with a softer overall ride.

Speedometer error is effectively zero, so ABS and traction control read the road as they did from the factory. Diameter change stays inside the conservative ±3% safety window — an OEM-safe fitment on most vehicles.

TakeSensible when prioritizing efficiency, winter traction or extra clearance over outright grip.

Share

Quick fitment verdict

285/30 R20245/35 R20 at a glance

OEM Safe

Within ±3%

Inside factory tolerance — ABS, ESP and cruise control stay calibrated.

Fender Clearance

Clears fender

Width and diameter stay close to stock — arch clearance unchanged.

Speedometer Impact

+0.07%

At a true 100 km/h the dash reads 100.1 km/h — negligible.

Daily Driving

Livable

Daily use is fine; expect a slightly different ride and cruise rev count.

Side-by-side telemetry

Dimensional read-out

Current

285/30 R20

Diameter
679.0 mm
Sidewall
85.5 mm
Wheel
20
Width
285 mm
NewNew

245/35 R20

Diameter
679.5 mm
Sidewall
85.8 mm
Wheel
20
Width
245 mm

Real-world effects

How this swap actually feels

  • Steering response
    59/100 · Softer turn-in
  • Ride comfort
    61/100 · More cushion
  • Fuel economy
    22/100 · Slightly lower drag
  • Highway cruising
    60/100 · Lower cruise revs
  • Pothole resistance
    56/100 · More wheel protection

Shareable card

Generate fitment card

Export a garage-grade telemetry card of this comparison — perfect for forums, Reddit and Discord.

Ride height

Lifted stance

+0.3 mm

Chassis sits higher — slightly more clearance, wheel-gap visually grows.

CurrentNew340 mm340 mmRIDE HEIGHT Δ+0.3 mm

New tire lifts the chassis by ~0.3 mm — more clearance, slightly more wheel-gap.

Suspension travel · arch clearance

Wheel gap

Wheel gap stays virtually unchanged

+0.3 mm

How the arch-to-tire gap reads from across the parking lot — the visual stance change everyone notices first.

18px

285/30 R20

18px

245/35 R20

Wheel-gap Δ+0.3 mm

Static · unloaded chassis

Fender relationship

Tucked · Flush · Poke

Stance language

The visual relationship between the tire's outer edge and the fender lip — the lens enthusiasts use to judge a fitment.

Tucked

Inside fender

Flush

Lip-aligned

Poke

Outside fender

Width & offset dependent

Speedometer reality

Dash reads 100.1 km/h

+0.07%

Taller rubber: at a true 100 km/h your dashboard reads optimistically high.

020406080100120140KM/H+0.07%DRIFTINDICATED100 km/hACTUAL100.1 km/h

ABS · ESP · cruise control

Setup telemetry

How this setup changes the car

Driver-perspective read-out of the 285/30 R20245/35 R20 swap — steering, comfort, stance and dash behavior in plain enthusiast language.

Steering feel

+0.3 mm sidewall

Steering response stays familiar

Sidewall delta is small; the wheel will feel like the OEM setup at the rim.

Ride firmness

30% → 35%

Ride quality essentially unchanged

Comfort delta is below the perceivable threshold for most drivers.

Fender relationship

-40 mm width

More tuck under the arch

Narrower contact patch tucks slightly inboard — cleaner look from the rear three-quarter.

Speedometer behavior

+0.07%

OEM-safe speedometer reading

Inside the factory ±3% tolerance — ABS, ESP and cruise control behave as designed.

Daily drivability

Ø +0.5 mm

Livable upgrade with minor trade-offs

Daily use is fine; expect a slightly different cruise rev count and a touch more road feel.

Direct answer

Is 245/35 R20 OEM-safe?

Yes. Overall diameter changes by +0.07% versus 285/30 R20. OEM-safe. Speedometer, ABS, ESP and gearing remain inside the factory tolerance.

Direct answer

Will 245/35 R20 rub?

Borderline. Width changes by -40 mm and diameter by +0.5 mm. Borderline — check fender lip and inner strut clearance under load.

Direct answer

Does the speedometer change?

Yes — by +0.07%. Swapping 285/30 R20 for 245/35 R20 changes overall diameter, so at an indicated 100 km/h your true speed becomes 100.1 km/h. That's within the ±3% OEM tolerance — no recalibration needed.

Direct answer

Does lower sidewall affect comfort?

Barely. Sidewall changes by +0.3 mm (30% → 35%). Comfort is essentially unchanged.

Current Tire

285/30R20

New Tire

245/35R20

Excellent Fit

Within ±3% — safe for daily driving

Diameter change

+0.5 mm

0.07%

Speedometer at 100

100.1 km/h

+0.07% error

Ground clearance

+0.3 mm

ride height delta

Sidewall change

+0.3 mm

revs/km: 468.4

Permalink for this comparison:

/compare/285-30-r20-vs-245-35-r20

Detailed comparison

Metric285/30 R20245/35 R20Difference
Overall diameter679.0 mm679.5 mm+0.5 mm (+0.07%)
Sidewall height85.5 mm85.8 mm+0.3 mm
Circumference2.133 m2.135 m+1.6 mm
Revs / km468.8468.4-0.3
Ground clearancereference+0.3 mm+0.3 mm
Speedometer @ 100 km/h100.0 km/h100.1 km/h+0.07 km/h

Verdict: excellent

Within ±3% — speedometer, ABS and traction control should behave normally.

Dimensional comparison

Side-by-side

Scaled engineering side-profile of both tires. Width, sidewall and overall diameter are dimensioned so you can see the change at a glance — without parsing the numbers.

Current

285/30 R20
Width 285 mmSW 86Ø 679mmR20
Profile
30%
Circumference
2.133 m

New

245/35 R20
Width 245 mmSW 86Ø 680mmR20
Profile
35%
Circumference
2.135 m

Side-by-side fitment

Geometry

Current

285/30 R20
Section width
285 mm
Aspect ratio
30%
Sidewall
85.5 mm
Wheel diameter
20″(508 mm)
Overall diameter
679.0 mm(26.73″)
Circumference
2.133 m
Revs / km
468.8

New

245/35 R20
Section width
245 mm
Aspect ratio
35%
Sidewall
85.8 mm
Wheel diameter
20″(508 mm)
Overall diameter
679.5 mm(26.75″)
Circumference
2.135 m
Revs / km
468.4

Real-world consequences

Pros / cons

Narrower tire (-40 mm)

Section width
  • Better aquaplaning resistance
  • Lower rolling resistance and slightly better MPG
  • Quieter ride, less tramlining
  • Lighter unsprung mass on the corner
  • Less dry grip at the limit
  • Smaller contact patch under hard braking
  • Stance can look tucked or undersized

Taller sidewall (+5% aspect)

Sidewall
  • Plusher ride, better pothole and curb protection
  • More forgiving on bad roads and trails
  • Lower wheel-damage risk on impacts
  • More sidewall flex, softer steering feel
  • Slightly delayed turn-in response

How it changes driving feel

Seat-of-the-pants

Steering response

Softer, slower

Ride comfort

Plusher ride

Road noise

Similar cabin noise

Wet / aquaplaning

Comparable wet behavior

Fuel economy

Negligible change

Curb / pothole protection

More sidewall, more cushion

Cluster preview

Within tolerance
020406080100120140KM/H+0.07%DRIFTINDICATED100 km/hACTUAL100.1 km/h

Speedometer impact

At a true 100 km/h, your dashboard will read 100.1 km/h after switching to 245/35 R20 — a +0.07% offset. Use the speedometer error calculator for any indicated speed, and the speedometer error guide for the full background.

Ground clearance change

The new tire's half-diameter changes ride height by +0.3 mm. Small differences are absorbed by suspension travel, but anything beyond ±10 mm can affect headlight aim, fender clearance and bump-stop margin. See the plus-sizing guide before committing.

Back to

285/30 R20

Back to

245/35 R20

Drivers also compare

Closely-related fitments and plus-size swaps for 285/30 R20 and 245/35 R20.

Related topics

Comparison hub

Back to the tire size comparison calculator

Browse every wheel and tire fitment comparison, by rim size or popularity.

Share

Frequently asked questions